Operating instructions/Installation instructions
Table Of Contents
- Contents
- Warning and Safety instructions
- Caring for the environment
- Guide to the cooker hood
- Modes of operation
- Before using for the first time
- Operation (Automatic mode)
- Operation (Manual mode)
- Operation (Automatic and Manual modes)
- Energy saving tips
- Cleaning and care
- Installation
- Service
- Technical data
Installation
*INSTALLATION*
44
Conversion kit for recirculation
mode
including directional unit, aluminium
hose and hose clips (the conversion kit
is not supplied and must be purchased
separately. See “Technical data”).
Keep the following in a safe place:
Montage
Installation
Montaje
Montaggio
Montering
Montagem
Asennus
Installation plan
See the installation plan for details on
the individual steps involved in the
installation of this appliance.
Uneven installation surfaces
If the installation surface is uneven
making flush installation difficult, the
frame can be realigned.
Fit the cooker hood as described on
the installation sheet.
Disconnect the cooker hood from the
mains electrical supply before
replacing the lamps (see “Warning
and Safety instructions”).
Using the suction cup supplied, pull
the lamp out of its holder.
Remove all other lamps in the same
way.