Operating and installation instructions Cooker hood DA 6000 W To avoid the risk of accidents or damage to the appliance it is essential to read these instructions before it is installed or used for the first time. en - GB M.-Nr.
Contents Caring for the environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Warning and Safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 How the cooker hood works . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Guide to the appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Miele|home . . . . . . . . . . . . . . . . . . . . . . . .
Contents Appliance dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 Safety distance between hob and cooker hood (S) . . . . . . . . . . . . . . . . . . . . . 31 Connection for air extraction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 Condensate trap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 Electrical connection . . . . . . . . . . . . . . . . . . . . . .
Caring for the environment Disposal of the packing material The transport and protective packing has been selected from materials which are environmentally friendly for disposal, and can normally be recycled. Packaging e.g. cling film, polystyrene and plastic wrappings must be kept out of the reach of babies and young children.
Warning and Safety instructions This appliance complies with all relevant local and national safety requirements. Inappropriate use can, however, lead to personal injury and damage to property. To avoid the risk of accidents and damage to the appliance, please read these instructions carefully before using it for the first time. They contain important information on the safety, installation, use and maintenance of the appliance.
Warning and Safety instructions ~ Before connecting the appliance to the mains supply, make sure that the connection details given on the data plate correspond with the on-site electricity supply; otherwise the appliance could get damaged. Consult a qualified electrician if in any doubt. ~ The electrical safety of this appliance can only be guaranteed when continuity is complete between the appliance and an effective earthing system which complies with current local and national safety regulations.
Warning and Safety instructions ~ Do not connect the appliance to the mains electricity supply by a multi-socket unit or an extension lead. These do not guarantee the required safety of the appliance (e.g. danger of overheating).
Warning and Safety instructions In order to ensure safe operation, and to prevent gases given off by the heating appliances from being drawn back into the room when the cooker hood and the heater are in operation simultaneously, an underpressure in the room of 0.04 mbar (4 pa) is the maximum permissible. One of the following technical measures may be necessary to ensure safe operation.
Warning and Safety instructions Correct use ~ Always switch the cooker hood on when a cooking zone is in use, otherwise condensation may collect in the hood, which could cause corrosion. ~ The cooker hood is operated by opening the hinged canopy. When opening or closing the canopy, do not place your hand inside the hood or between the glass slats. ~ Do not use pots or pans that are taller than the lower edge of the cooker hood.
Warning and Safety instructions ~ Safety regulations prohibit the fitting of a cooker hood over solid fuel stoves. ~ All ducting, pipework and fittings must be of non-flammable material. These can be obtained from the Miele Spare Parts department or from builders' merchants. ~ The appliance must not be connected to a chimney or vent flue which is in use. Neither should it be connected to ducting which ventilates rooms with fireplaces.
How the cooker hood works When the canopy is tilted forwards, cooking vapours are drawn into the open glass slats, through the grease filters inside the cooker hood and then conducted outside. The re-usable metal grease filters remove solid particles (grease, dust, etc.) from the kitchen vapours, preventing soiling of the cooker hood. The exhaust socket can be fitted with the non-return flap supplied. This flap is closed when the cooker hood is switched off.
Guide to the appliance dai2436 12
Guide to the appliance a Position when switched off b Position when switched on f Sensor for the feature lighting Canopy and slats open g Sensor for hob lighting c Position for maintenance This sensor switches the hob lighting on and off, and is also a dimmer switch. Position for cleaning inside the cooker hood, for removing the grease filters and for changing the lamp.
Miele|home Con|ctivity – When the hob is switched on, the canopy opens, the hob lighting switches on and after a short while the cooker hood fan switches on. dai2405 This cooker hood is communication enabled. + + Communication module XKM 2000 DA a, available as an optional extra, enables the operation of the cooker hood to be automatically controlled by the operating status of a Miele electric hob with onset controls.
Operation Hinged canopy The cooker hood is operated by opening the hinged canopy. It opens by touching the On/Off sensor s or the Hob lighting sensor n. It closes by touching the On/Off sensor s. ,When opening or closing the canopy, do not place your hand or catch your fingers inside the hood or between the glass slats. If the cooker hood has been connected to a window contact switch via the Miele DSM 400 control module, the fan cannot be switched on if the window is shut.
Operation Automatic switch-off of the Intensive setting Run-on option "5m15" You can set the Intensive setting so that it always only runs for 10 minutes before reverting automatically to level 3. It is advisable to leave the fan running for a few minutes after cooking has finished to neutralise any lingering odours in the air. ^ To set this option, both the fan and the hob lighting must be switched off. The fan can be set to switch off automatically after either 5 or 15 minutes.
Operation To switch the fan off s Hob lighting n ^ Touch the On/Off sensor s to switch the fan off. The hob lighting can be switched on and off independently of the fan. The canopy and the slats will close. If the On/Off sensor s is touched whilst the canopy is closing, the canopy will stop and the slats will stay open. If the On/Off sensor s is touched again, the canopy will open again. The slats will shut and then open again. The fan switches on again.
Operation To switch the hob lighting off Operating hours counter l ^ Touch the Hob lighting sensor n briefly. The canopy will remain open. The number of hours the appliance has been in operation is stored in memory. ^ The light will also switch off if the canopy is closed by touching the On/Off sensor s. The operating hours counter tells you when the grease filters need to be cleaned.
Operation Reading the grease filter operating hours counter Altering the grease filter operating hours counter To check the percentage of time set already used You can set the operating hours counter to suit the type of cooking you do. ^ Press the On/Off sensor s to switch the fan on. Wait until the canopy has opened and the fan is running. ^ Touch and keep your finger on the Grease filter sensor l. One or more of the 1 to 4 sensors will flash.
Operation ^ Touch the 1 sensor to select a shorter time and the 4 sensor to select a longer time, until the time required has been set. ^ Touch the Grease filter sensor l to confirm your selection. All the lamps will go out. If you do not confirm your selection within 4 minutes, the cooker hood will automatically revert to the original setting. Sensor tones When selecting a function with the sensors, an audible tone will sound briefly to confirm. The audible tone can be deactivated.
Operation For your safety The glass slats are spring loaded. They yield if they are blocked by somone's fingers or another object. dai2516 Safety switch-off for the canopy Safety switch-off for the glass slats If the canopy is prevented from closing by someone's hand or an object blocking it, it will be released from the upper locking mechanism, spring open and stop closing. dai2517 The extendable slats also have a release mechanism.
Operation Problem Safety switch-off after 10 hours If the canopy stops whilst it is being opened or closed and you hear a long tone sounding 4 times, this means that the canopy's safety switch-off has been activated. Should the cooker hood be left on, the fan will switch off automatically after 10 hours. The hob lighting will remain on. The canopy will remain open. ^ Make sure that the neither the canopy nor the glass slats have been blocked by anything.
Cleaning and care A range of Miele branded cleaning and care products are available to order via the internet on www.miele-shop.com. Housing General The surfaces are susceptible to scratches and abrasions. Please observe the following cleaning instructions. ^ All external surfaces and controls can be cleaned using a Miele E-Cloth or with warm water and a little washing-up liquid applied with a well wrung-out soft sponge or cloth. Only use a damp cloth as water could get into the appliance and cause damage.
Cleaning and care dai2438 Position for maintenance The housing can be opened to clean inside the cooker hood, remove the grease filters and to change the lamps. To open the housing ^ Switch the cooker hood on by touching the On/Off sensor s or the Hob lighting sensor n. The canopy will open into the operating position. ^ Before opening the housing, clear everything from the hob.
Cleaning and care To close the housing Grease filters The grease filters should be cleaned regularly (at least every 3-4 weeks) to avoid a build-up of grease. They should be cleaned immediately if the l sensor lights up. ,An oversaturated filter is a fire ^ To close the housing again, raise the canopy a up by pushing on the second glass slat from the top as shown, until it engages back into the filter housing b.
Cleaning and care Cleaning the grease filters by hand ^ Clean the filters with a soft nylon brush in a mild solution of hot water and a little washing-up liquid. Do not use "neat" washing up liquid. Do not use: – cleaning agents containing descaling agents, – powder cleaners, cream cleaners or abrasive all-purpose cleaners. – oven sprays.
Cleaning and care Changing a lamp ,Exercise caution when changing halogen lamps. They get very hot during use, and remain hot for some time after being switched off: danger of burning. Wait until the lamps have cooled down before changing them. ^ To change a halogen lamp, lower the canopy into the maintenance position; see "Position for maintenance". ^ Before any cleaning or maintenance work, disconnect the cooker hood from the mains supply (See "Warning and Safety Instructions").
After sales service In the event of a fault which you cannot correct yourself, or if the appliance is under guarantee, please contact: – your Miele Dealer or – the Miele Customer Contact Centre (see back cover for address). Please note that telephone calls may be monitored and recorded to improve our service. When contacting Miele, please quote the model and serial number of your appliance. both of which are given on the data plate.
Installation Before installation it is important to read the information given on the following pages as well as the "Warning and safety" instructions at the beginning of this book. Installation diagram See enclosed Installation diagram for instructions on how to install this appliance. Fixings The screws and wall plugs which are supplied with the building-in frame DER 6000 are suitable for masonry walls. For other types of wall, use appropriate fixings.
Appliance dimensions DER 6000 DA 6000 W A 400 310 150 160 A 615+20 420 42° 588 606 615+20 588 600 545 606 600 50 S > 350 >120 > 410 B 910 915+20 892 892 280 904 910 904 915+20 B C max.
Appliance dimensions Safety distance between hob and cooker hood (S) The safety distance between the top of a cooker or hob and the bottom of the cooker hood canopy must measure at least 350 mm, unless a greater distance is specified by the manufacturer of your cooking appliance. See "Warning and Safety instructions". Do not install this cooker hood over a gas hob. – Account should also be taken of the height of the person who will be using the hood most often.
Connection for air extraction ,Important: To avoid the danger of toxic fumes, please observe the Warning and Safety instructions. This is especially crucial when using the cooker hood at the same time as another heating appliance which relies on air from the same room. The cooker hood should be installed according to local and national building regulations. Seek approval from the building inspector where necessary. – All ducting, pipework and fittings must be of non-flammable materials.
Connection for air extraction Important: If the exhaust ducting is to run through rooms, ceiling space etc. where there may be great variations in temperature between the different areas, the problem of condensation will need to be addressed. The exhaust ducting will need to be suitably insulated. Condensate trap (optional extra) In addition to insulating the exhaust ducting, we recommend that a suitable condensate trap is also installed to collect and evaporate any condensate which may occur.
Electrical connection All electrical work should be undertaken by a suitably qualified and competent person in strict accordance with current national and local safety regulations (BS 7671 in the UK). Installation, repairs and other work by unqualified persons could be dangerous, for which the manufacturer cannot be held liable. Ensure power is not supplied to the appliance until after installation or repair work has been carried out.
Operation with Control module DSM 400 The Miele DSM 400 control module can be used to combine the cooker hood with other components. It enables the following: Connection to a window contact switch If adequate ventilation to the room can only be ensured by having a window open when the cooker hood is in use at the same time as a heating appliance which depends on the air from the same room, then the control module can be used to connect a window contact switch (not supplied) to the appliance.
Operation with Control module DSM 400 Connection to a light switch The control module can be used to switch on the hob lighting on the cooker hood and also to dim it, depending on model, via a light switch in the house. If the hob lighting is activated by an external lightswitch, the canopy tilts forwards and the hob lighting is switched on. If the hob lighting is switched off, the canopy remains open. The feature lighting cannot be operated via the control module.
Technical data Total connected load. . . . . . . . . . 504 W – Fan motor . . . . . . . . . . . . . . . . . 290 W – Canopy mechanism . . . . . . 120 + 4 W – Hob lighting . . . . . . . . . . . . . 4 x 20 W – Feature lighting . . . . . . . . . . . 1 x 10 W Voltage . . . . . . . . . . . . . . . . . . AC 230 V Frequency . . . . . . . . . . . . . . . . . . 50 Hz Fuse rating . . . . . . . . . . . . . . . . . . . . 5 A Weight. . . . . . . . . . . . . . . . . . . . . .
Alteration rights reserved / 4209 M.-Nr.
