Technical data

Hinged canopy
The cooker hood is operated by
opening the hinged canopy.
It opens by touching the On/Off
sensor s or the Hob lighting sensor n.
It closes by touching the On/Off
sensor s.
,
When opening or closing the
canopy, do not place your hand or
catch your fingers inside the hood or
between the glass slats.
To switch the fan on s
^ Touch the On/Off sensor s.
The canopy opens and three of the
slats extend.
The fan then comes on on power
level 2.
The On/Off s and 2 sensors light up.
If the cooker hood has been
connected to a window contact
switch via the Miele DSM 400 control
module, the fan cannot be switched
on if the window is shut. The On/Off
s and 2 sensors flash.
If the On/Off sensor s is touched whilst
the canopy is opening, the canopy
stops.
If the On/Off sensor s is touched
again, the canopy shuts again.
Then the slats extend and close again.
To select a power level
Depending on the intensity of the
cooking vapours, levels 1 to 3 are
usually sufficient for normal cooking.
^ Select the level you require by
touching the 1, 2 or 3 sensors.
Intensive setting
^
For short periods of cooking food
with intensive vapours and a strong
aroma, e.g. when searing meat, you
may wish to select level 4, the
Intensive setting.
Operation
15
dai2437