Technical data

Con|ctivity
This cooker hood is communication
enabled.
Communication module XKM 2000 DA
a, available as an optional extra,
enables the operation of the cooker
hood to be automatically controlled by
the operating status of a Miele electric
hob with onset controls.
For communication to take place, the
hob must be fitted with the relevant hob
communication module b.
The hob transmits information about its
operating status to the cooker hood via
the household power supply
(Powerline) c.
–
When the hob is switched on, the
cooker hood hob lighting switches on
and after a short time the cooker
hood fan switches on.
–
During cooking, the cooker hood
automatically sets its power level
according to the number of cooking
zones in operation and their power
levels.
–
After the hob has been switched off,
the cooker hood fan and hob lighting
will switch off automatically after a
period of time.
The communication module is fitted to
the cooker hood in the area of the
motor and is connected to the controls
of the cooker hood.
The appliance specific control cabling
set is also required.
For detailed information about this
function and fitting instructions, please
read the operating instructions for the
XKM 2000 DA and the installation
instructions for the control cabling set.
Installation must be carried out by a
Miele service technician or suitably
qualified electrician.
Communication module
XKM 2000 DA .......M.-Nr. 7 209 000
Control cabling set
DA 7090 W, 7000 D . . M.-Nr. 7 944 580
Miele|home
11