Technical data

Cleaning the grease filters by hand
^
Clean the filters with a soft nylon
brush in a mild solution of hot water
and a little washing-up liquid.
Do not use "neat" washing-up liquid.
Do not use:
–
cleaning agents containing
descaling agents,
–
powder cleaners, cream cleaners or
abrasive all-purpose cleaners.
–
oven sprays.
Cleaning the grease filters in the
dishwasher
^ Place the filters with the short side
upright in the lower basket, ensuring
the spray arm is not obstructed.
^ Do not wash at more than 65° C. If a
Miele dishwasher is being used,
select the Sensor wash programme.
^ Use a mild dishwasher detergent.
Depending on the cleaning agent
used, cleaning the filters in a
dishwasher can cause permanent
discolouration to the surface.
However, this will not affect the
functioning of the filters in any way.
^
After cleaning, leave the filters to dry
on an absorbent surface before
replacing them.
^
When removing the filters for
cleaning, also clean the now
accessible areas of the housing to
prevent the risk of these catching fire.
^
Replace the grease filters.
Resetting the Grease filter operating
hours counter
After cleaning, the operating hours
counter needs to be reset.
^ Whilst the fan is switched on, touch
the Grease filter sensor l for
approx. 3 seconds until only the 1
sensor is flashing.
The Grease filter sensor l will go
out.
If you want to clean the grease filters
before the operating hours counter has
reached its maximum:
^
Touch the Grease filter sensor l for
approx. 6 seconds until only the
1 sensor is flashing.
Cleaning and care
18