Operating and Installation instructions

Installation
*INSTALLATION*
25
a
1vent collar
for 6" (150mm) or5" (125mm)
exhaust ducting (not to be used with
recirculation mode).
b
2 brackets
for securing the ventilation hood to
the wall (not required when installed
underneath the upper cabinet).
c
1 drilling template
d
1cover foil
for rear exhaust opening when using
recirculation mode. The foil is
included with the charcoal filter
(optional accessory).
4 screws 5x60mm and
8 plugs 8x50mm
for attaching to the wall.
 The screws and plugs are
designed for use in solid walls only.
Use different fasteners for other wall
construction types.
Make sure that the wall can support
the load.
4 self-tapping screws 4.2x30mm
for securing the ventilation hood onto
the upper cabinet (from the top).
4 wood screws 4x30mm
for securing the ventilation hood onto
the upper cabinet (from below).
4cover caps