Operating and Installation instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Caring for the environment
- Description of functions
- Guide to the appliance
- Operation
- Energy-saving tips
- Cleaning and care
- Installation
- Before installation
- Installation materials
- Appliance dimensions
- Distance between cooktop and ventilation hood (S)
- Installation recommendations
- Removing the protective film
- Deflector
- Installation underneath the wall unit
- Wall installation
- Preparation for extraction mode
- Preparation for recirculation mode
- Power supply
- Functional check
- Electrical connection
- Air venting
- Customer Service
- Technical data
Installation
*INSTALLATION*
34
Insert the hood.
Tighten the two screws on the right
and left hand sides of the back of the
appliance. This will adjust the angle
and secure the ventilation hood.
Refit the bulbs.
Reinsert the grease filters.
Preparation for extraction
mode
When using 6" (150mm) exhaust
ducting, use a sharp knife to cut the
exhaust socket to size.
When using5" (125mm) exhaust
ducting, install the exhaust socket as
it is.
Attach the exhaust ducting, e.g.,
flexible hose, to the exhaust socket
using a hose clip (available as an
optional accessory).
Insert the vent collar into the exhaust
opening and secure it by turning it
slightly clockwise.