Operating and Installation instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Caring for the environment
- Description of functions
- Guide to the appliance
- Operation
- Energy-saving tips
- Cleaning and care
- Installation
- Before installation
- Installation materials
- Appliance dimensions
- Distance between cooktop and ventilation hood (S)
- Installation recommendations
- Removing the protective film
- Deflector
- Installation underneath the wall unit
- Wall installation
- Preparation for extraction mode
- Preparation for recirculation mode
- Power supply
- Functional check
- Electrical connection
- Air venting
- Customer Service
- Technical data
Installation
*INSTALLATION*
35
See “Connection for air extraction”
for additional instructions on
attaching the ducting.
Preparation for recirculation
mode
Fit the charcoal filter (see “Cleaning
and care”).
Power supply
Refer to the notes in “Electrical
connection” and “IMPORTANT
SAFETY INSTRUCTIONS” before
connecting to the electricity supply.
Connect the hood to the electrical
supply.
Functional check
To do this, switch the blower on.
- In extraction mode, the air should not
come out of the recirculation grille at
the front of the hood.
- In recirculation mode, the air should
come out of the recirculation grille at
the front of the hood.
If this does not happen, the deflector is
not installed correctly (see “Deflector”).