Operating and Installation instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Caring for the environment
- Guide to the ventilation hood
- Description of functions
- Before using for the first time
- Operation (Automatic mode)
- Operation (Manual mode)
- Operation (Automatic and Manual modes)
- Energy-saving tips
- Cleaning and care
- Installation
- Customer Service
- Technical data
Installation
*INSTALLATION*
40
Before installation
Before installation, it is important
to read the information contained in
this chapter and in the “IMPORTANT
SAFETY INSTRUCTIONS” chapter.
The ventilation hood is intended for
installation in wall cabinets, ventilation
housing units, vent flues or above
kitchen islands.
Before installing, check to make sure
that the top of the appliance will be
accessible once it is installed.
If this is not the case, install the exhaust
ducting and prepare the electrical
connection before installation.
Installation materials
3.5x16mmscrews for securing the
ventilation hood
Conversion kit for recirculation
mode
including directional unit, hose, and
hose clips (not supplied, but available
as an optional accessory. See
“Technical data”).
Keep the following in a safe place:
Montage
Installation
Montaje
Montaggio
Montering
Montagem
Asennus
Installation plan
See the installation plan for details of
the individual steps involved in the
installation of this appliance.
Information is subject to change. Please
refer to our website to obtain the most
current product specification, technical
& warranty information.
1 lever
For removing the bulbs