Operating and Installation Guide

Installation
*INSTALLATION*
47
Conversion kit for recirculation
mode
including directional unit, hose, and
hose clips (not supplied, but available
as an optional accessory. See
“Technical data”).
Keep the following in a safe place:
Montage
Installation
Montaje
Montaggio
Montering
Montagem
Asennus
Installation plan
See the installation plan for details of
the individual steps involved in the
installation of this appliance.
Uneven installation surface
If the installation surface is uneven,
making flush installation difficult, the
frame can be realigned.
 Install the ventilation hood as
described on the installation plan.
 Disconnect the ventilation hood from
the electrical supply (see “Important
safety instructions”).
 Using the suction cup supplied, pull
the lamp out of its holder.
 Remove all other bulbs in the same
way.