Operating and Installation instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Caring for the environment
- Guide to the appliance
- Description of functions
- Operation
- Energy-saving tips
- Cleaning and care
- Installation
- Before installation
- Installation parts
- Appliance dimensions
- Distance between cooktop and ventilation hood (S)
- Installation recommendations
- _
- Attaching the front panel
- Aligning the fume deflector
- Installing the grease filter
- Connecting the exhaust ducting
- Setting up recirculation mode
- Power supply
- Electrical connection
- Air venting
- Customer Service
- Technical data
Operation
18
Delayed shut-down
It is advisable to run the blower for a
few minutes after cooking has
finished.
This helps to neutralize any lingering
vapors and odors in the air.
It also reduces the risk of residues
accumulating in the ventilation hood
and any resulting odors.
Turning off the blower
Push in the fume deflector to switch
off the blower. The next time the fume
deflector is pulled out, the hood will
operate at power level 2, or
Press the On/Off button to turn the
blower off.
The symbol will go out.
Turning the overhead lighting
on/off
The overhead lighting can be turned on
and off independently from the blower.
You can turn the overhead lighting on
and off by pulling out the fume
deflector and pushing it in again or by
pressing the lighting button .
The symbol is lit when the overhead
lighting is turned on.
Safety switch-off
If the ventilation hood is switched on
but not used for 10 hours, the fan shuts
off automatically. The cooktop lighting
remains switched on.
Pressing the On/Off buttonwill
switch the fan back on again.