Operating and Installation instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Caring for the environment
- Guide to the appliance
- Description of functions
- Operation
- Energy-saving tips
- Cleaning and care
- Installation
- Before installation
- Installation parts
- Appliance dimensions
- Distance between cooktop and ventilation hood (S)
- Installation recommendations
- _
- Attaching the front panel
- Aligning the fume deflector
- Installing the grease filter
- Connecting the exhaust ducting
- Setting up recirculation mode
- Power supply
- Electrical connection
- Air venting
- Customer Service
- Technical data
Installation
*INSTALLATION*
34
Secure the spacer strip underneath
the sides of the cabinetry, flush with
the rear wall.
Draw a vertical line up both inside
walls of the cabinetry from the front
of the spacer strip.
The brackets are designed for ⁵/₈“
and ³/₄” (16 and 19mm) thick unit
sides. Orientate the bracket so that
the vertical depth matches the
thickness of the unit side.
Screw the brackets onto the right and
left inside walls of the housing unit as
shown. The back edge of the bracket
should align with the vertical line
drawn up from the front of the spacer
strip and the lower edge should align
with the lower edge of the cabinetry
side wall.