Operating and Installation instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Caring for the environment
- Guide to the appliance
- Description of functions
- Operation
- Energy-saving tips
- Cleaning and care
- Installation
- Before installation
- Installation parts
- Appliance dimensions
- Distance between cooktop and ventilation hood (S)
- Installation recommendations
- _
- Attaching the front panel
- Aligning the fume deflector
- Installing the grease filter
- Connecting the exhaust ducting
- Setting up recirculation mode
- Power supply
- Electrical connection
- Air venting
- Customer Service
- Technical data
Installation
*INSTALLATION*
38
Aligning the fume deflector
The position of the fume deflector can
be brought forward by up to approx.
1³/₈" (35mm) using the adjusting
screws on either side of the fume
deflector. This allows the fume deflector
to be aligned to the front of the
cabinetry on either side.
Use a screwdriver to align the fume
deflector correctly.
Installing the grease filter
Remove the protective foil around the
edge of the grease filter.
When installing the grease filter, make
sure that the red plastic guides are at
the front and facing upwards.
Place the grease filter in the front of
the fume deflector, press it upwards
and push it in together with the fume
deflector. It will slide onto the
retaining pins at the back. Finally,
push the grease filter back a little
more.