Operating and Installation instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Caring for the environment
- Guide to the appliance
- Description of functions
- Operation
- Energy-saving tips
- Cleaning and care
- Installation
- Before installation
- Installation parts
- Appliance dimensions
- Distance between cooktop and ventilation hood (S)
- Installation recommendations
- _
- Attaching the front panel
- Aligning the fume deflector
- Installing the grease filter
- Connecting the exhaust ducting
- Setting up recirculation mode
- Power supply
- Electrical connection
- Air venting
- Customer Service
- Technical data
Installation
*INSTALLATION*
39
Connecting the exhaust
ducting
Attach the exhaust ducting, e.g.,
flexible hose, to the exhaust socket
using a hose clip (available as an
optional accessory).
Setting up recirculation mode
If site conditions are not suitable for the
ventilation hood to be used with vented
extraction, it must be set up for
recirculation. A conversion kit, available
from a specialist dealer or from
Customer Service, is required for
operating the ventilation hood in
recirculation mode. You will also need a
charcoal filter (see “Technical data”).
Conversion kit DUU150 with a plastic
grille is suitable for installing in a
concealed area at the top of the
cabinet.
Conversion kit DUU151 with a stainless
steel grille is recommended if the grille
is to be installed in a visible area.