Operating/Installation Instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Caring for the environment
- Guide to the appliance
- Description of functions
- Operation
- Energy-saving tips
- Cleaning and care
- Installation
- Electrical connection
- Air venting
- Service and warranty
- Technical data
Installation
27
a
2 brackets
for securing the hood in the wall
unit.
b
1 spacer strip
for concealing the gap between the
rear of the appliance and the wall.
c
Recirculation kit for recirculation
mode
(not supplied, but available as an
optional accessory - see “Technical
data”). The kit contains an exhaust
grille and flexible aluminum hose
with hose clips.
d
DML 400 installation kit for fitting
a drop-down front panel
(not supplied but available as an
optional accessory). Contains
hinging and screws for fitting a front
panel to match kitchen cabinetry.
8 screws ³/₁₆“ x ⁹/₁₆” (4 x 15 mm)
for securing the hood in the wall unit.
8 screws M4 x ¹/₂" (12 mm)
for securing the hood to the brackets.
4 of the screws can be used instead of
the plastic rivets to secure the spacer
strip.
2 screws ³/₁₆“ x ⁹/₁₆” (4 x 15 mm) for
fastening the hood to the rear panel.
4 plastic rivets
for securing the spacer strip.