Operating/Installation Instructions

Before using for the first time
23
Activating the ventilation hood
 The cooktop and ventilation hood
must be switched off.
 Press the delayed shutdown
control for approx. 10seconds
until 1 lights up.
 Then press in order:
– the  control,
– then the  control,
– then the lighting control.
The ventilation hood is now in signing
on/off mode.
If a wireless connection has not yet
been established, 2 and 3 will flash at
the same time.
If a wireless connection has already
been established, 2 and 3 will light up
constantly (Con@ctivity 2.0 is already
activated or a remote control is signed
on).
 To activate Con@ctivity 2.0, press the
 control.
2 will light up constantly, 3 will flash on
and off.
After a few seconds, 2 and 3 will light
up constantly, B will flash on and off.
The search for a wireless connection
will start.
Activating the cooktop
 While the ventilation hood is
searching for a signal, start activating
the cooktop.
For more details, see the cooktop
operating instructions.
 When the cooktop registers that a
connection has been established, exit
activation on the cooktop.