Operating/Installation Instructions

Before using for the first time
25
Press the control to deactivate
Con@ctivity 2.0.
2 will light up constantly, 3 will flash on
and off.
After a few seconds, 2 and 3 will start
flashing on and off.
The wireless connection has now been
deactivated.
To deactivate the cooktop, please
refer to the corresponding operating
instructions.
Please keep in mind that disabling the
connection will also disable any
remote control function being used.
The remote control must then be
reactivated.
Signing the remote control on/
off
If the connection has been lost between
the remote control and the ventilation
hood, the remote control and the
remote control function on the
ventilation hood must be signed on
again. To do this, the remote control
function on the ventilation hood and the
remote control must first be signed off.
Please bear in mind that disabling the
signal will also disable any
Con@ctivity 2.0 connection and this
will have to be activated again.
Switch the ventilation hood off. The
canopy must be retracted.
Remove the grease filters.
The controls are accessible via the slots
for the grease filters.