Manualshelf

FS_DA 3698_US-en-US

ManualsBrandsMiele ManualsCookingDA 3698 - Built-in ventilation hood with motorized pull-out canopy for maximum convenience
123
DA 3698
Built-inventilation hood
DA 3698, DA 3698EXT (Installation drawing)– US
1. Vented, recirculation with DUU 150., 2. Housing unit
carcase is 38mm shorter than the door.This also applies
to adjacent cabinets when the appliance is installed in a
600mm wide housing unit., 3. Installation is also possible
in a 60cm wide housing unit.In this case, the door of the
housing unit must open upwards (top-hinged) to enable
access to grease filters. This also applies to adjacent
cabinets., 4. Vent connection alternatively to the rear.,
5. After the wall unit has been installed, a partition can
be fitted. The slots for grease filters and odour-absorbing
filters for use in recirculation mode must be accessible., 6.
Alternatively, side sectiions can be added to the wall unit.,
In regard to dimenions for wall unit height and cut-outs,
fitted accessories should be taken into account (e.g.
silencers, XKM module).
DA 3698(Installation drawing)
1. Vented, recirculation with DUU 150., 2. Housing unit
carcase is 38mm shorter than the door.This also applies
to adjacent cabinets when the appliance is installed in a
600mm wide housing unit., 3. Installation is also possible
in a 60cm wide housing unit.In this case, the door of the
housing unit must open upwards (top-hinged) to enable
access to grease filters. This also applies to adjacent
cabinets., 4. Vent connection alternatively to the rear.,
5. After the wall unit has been installed, a partition can
be fitted. The slots for grease filters and odour-absorbing
filters for use in recirculation mode must be accessible., 6.
Alternatively, side sectiions can be added to the wall unit.,
In regard to dimenions for wall unit height and cut-outs,
fitted accessories should be taken into account (e.g.
silencers, XKM module).