Operating and Installation instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Caring for the environment
- Guide to the appliance
- Description of functions
- Before using for the first time
- Operation (Automatic mode)
- Operation (Manual mode)
- Operation (Automatic and Manual modes)
- Energy-saving tips
- Cleaning and care
- Installation
- Customer Service
- Technical data
Installation
*INSTALLATION*
48
a
Vented, recirculation with conversion
kit DUU150.
(When using the recirculation
conversion kit DUU151, please note
the dimensions in the corresponding
installation instructions.)
b
The wall cabinet housing needs to
be 1¹/₂" (38mm) shorter than the
wall cabinet door.
c
Installation is also possible in a
23⁵/₈" (600mm) wide cabinet. The
following should be noted:
– The adjacent cabinetry must also
be shortened by 1¹/₂" (38mm).
– The doors of the built-in and
adjacent cabinetry must be
opened to the top so that the
grease filters are accessible.
d
The ducting can also be connected
at the back.
e
The upper cabinet can be fitted with
a partition after installation. Slots for
the grease filters and charcoal filters
(for recirculation mode) must remain
accessible.
f
Alternatively, the upper cabinet can
be fitted with side sections.