Installation Instructions

Operation (Automatic and Manual modes)
24
Checking the filter saturation
indicator
Before the set operating time has run
out, you can check what percentage of
the time has elapsed.
 Press the On/Off button  to turn the
fan on.
 Press and hold the operating hours
button :
The grease filter symbol  lights up.
One or more of the fan power level
indicators will flash simultaneously.
The number of flashing indicators
shows the elapsed operating hours as a
percentage.
Indicator 1 .................................... 25%
Indicators 1 and 2 ......................... 50%
Indicators 1 to 3 ........................... 75%
Indicators 1 to IS ........................ 100%
The elapsed operating hours remain
stored in the memory when the hood
is turned off or if power to the
appliance is lost.
Adjusting the height of the
canopy
The height adjustment feature on the
canopy can be used to:
– adapt the height of the hood to suit
the installation conditions.
– adjust the working area underneath
the hood to the height of the user.
– maximize steam extraction by
lowering the steam during particularly
intensive cooking.
– create more working space above the
cooktop by raising the canopy when
required.
 The canopy can be raised or lowered
by pressing the  controls briefly.
 Pressing one of the controls again
stops the canopy.
If it is not stopped, the canopy will
automatically be raised or lowered to its
fullest extent.
Repeated use of the height
adjustment feature over several
minutes will cause it to cut out.
It can be used again after a pause.