48” Decorator Wall Hood DA 5428W Shown: DA 5428 W Hood over a KM 3484 Cooktop Please note: This information is subject to change 8mieleusa.
48” Decorator Wall Hood SPECIFICATIONS Overall Unit Width 473/16” (1198 mm) Overall Unit Height (Air Extraction) 29 /16” - 419/16” (745 - 1005 mm) Overall Unit Height (Recirculation) 347/16” - 4611/16” (875 - 1185 mm) 5 Overall Unit Depth 201/2” (520 mm) Fan Fan Speeds Maximum CFM 4 625 CFM, (Reducing Collar is available to reduce Air flow to less than 400 CFM) Duct Recommended Duct Diameter 6” (150 mm) Electrical Electrical Requirements Power Cord 120V, 60Hz,15A Molded NEMA 5-15 plug, 2.
48” Decorator Wall Hood INSTALLATION SPECIFICATIONS Page 3 of 6
8” Decorator Wall Hood INSTALLATION SPECIFICATIONS Mounting Details • • • Center unit over cooking surface Distances “S” is determined by the cooking surface. See “Distance between cooktop and hood (S)” dimensions. Area behind mounting plates MUST be reinforced using a minimum of 1/2” plywood.
48” Decorator Wall Hood INSTALLATION SPECIFICATIONS Distance Between Cooktop and Ventilation Hood (S) Page 5 of 6
48” Decorator Wall Hood INSTALLATION SPECIFICATIONS Recirculation Kit For Recirculation mode conversion kit DUW 20 is required.
