Owner's Manual

Cleaning and care
28
T
o remove a grease filter, release the
locking clip. Then, open the filter to a
45° angle, unhook it, and remove it
from the hood.
Cleaning the grease filters by hand
Cle
an the filters with a soft nylon
brush in a mild solution of hot water
and dish soap. Do not use undiluted
dish soap.
Unsuitable cleaning agents
Unsuitable cleaners can cause damage
t
o the filter surfaces if used regularly.
Do not use any of the following:
Lime removers
Abrasive powders or abrasive liquids
Aggressive all-purpose cleaners and
degr
easer sprays
Oven sprays
Cleaning the grease filters in the
dishwasher
Place
the filters as upright or inclined
as possible in the lower basket.
Ensure that the spray arm is not
obstructed.
Use a common household
dishwasher det
ergent.
Selec
t a program with a wash
temperature between 122°F (50°C)
and 149°F (65°C). In a Miele
dishwasher use the "Normal"
program.
Depending on the detergent used,
clean
ing the filters in a dishwasher
may cause the inside filter surfaces to
become discolored. However, this will
not affect the functioning of the filters
in any way.
After cleaning
Aft
er cleaning, leave the filters on an
absorbent surface to dry.
When r
emoving the filters for
cleaning, also clean off any
accessible oil or fat buildup from the
housing. Doing so will prevent a fire
hazard.