Owner's Manual

Activating Con@ctivity 2.0
43
If Con@ctivity 2.0 has been activated,
the indica
tors for levels 2 and 3 will be
constantly lit.
If Con@ctivity 2.0 has not been
activat
ed, the indicators for levels 2 and
3 will flash simultaneously.
 T
o exit the check, press the Delayed
shut down button 515. All
indicators will go out.
 T
o check whether activation has
taken place on the cooktop, please
refer to corresponding operating
instructions.
 If a connection cannot be established
despite activation of the Con@ctivity
function on the hood and the
cooktop, the function must first be
deactivated and then reactivated on
both appliances.
Deactivating Con@ctivity 2.0
 Deac
tivation on the hood is similar to
the activation procedure. Select the
"" button instead of the "" button.
 T
o deactivate the cooktop, please
refer to the corresponding operating
instructions.
Please keep in mind that disabling the
connection will also disable any
r
emote control function being used.
The remote control must then be
reactivated.