Installation and Operation

Operation (Automatic and Manual modes)
23
Filter saturation indicator
The number of hours the hood has
been in operatio
n is stored in appliance
memory.
The filter saturation indicators show
when the filters nee
d to be cleaned or
changed by lighting up the grease filter
symbol  or OdorFree Charcoal Filter
symbol . Additional information on
cleaning and changing the filters and
resetting the filter saturation counters
can be found under "Cleaning and
care."
Adjusting the filter saturation indica‐
tor for the g
rease filter
You can set the filter saturation indica‐
tor t
o suit your cooking habits.
The factory default setting is a cleaning
int
er
val of 30 hours.
– Select a shorter time (20 hours) if you
often fr
y foods.
– We also recommend a shorter clean‐
ing interval if you only cook occa‐
sionally. This will prevent grease
buildup from hardening and making
cleaning more difficult.
– Select a longer cleaning interval of 40
or 50
hours if you use very little fat
when cooking.
 Press the On/Off button  to turn off
the fan.
 Tap the delayed shut down button 
and the gr
ease filter button  at the
same time.
The grease filter symbol  and one of
the fan power level indicat
ors will flash.
The indicators 1 to
IS show the current
time setting:
Indicator 1 ............................... 20 hours
Indicator 2................................ 30 hours
Indicator 3................................ 40 hours
Indicator IS .............................. 50 hours
 T
ap the relevant button to select the
time r
equired.
 Confirm your choice by touching the
gr
ease filter button .
All the indicator lights will go out.
If the setting is not confirmed within 4
minu
t
es, the hood automatically reverts
to the old setting.