Operating & Installation Instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Caring for the environment
- Guide to the appliance
- Description of functions
- Before using for the first time
- Operation (Automatic mode)
- Operation (Manual mode)
- Operation (Automatic and Manual modes)
- Energy-saving tips
- Cleaning and care
- Installation
- Air venting
- Electrical connection
- Service and warranty
- Technical data
Operation (Manual mode)
30
Turning power management on/off
Switch off the blower and the lighting.
Touch the delayed shutdown control
for approx. 10seconds, until 1
lights up in the power level display.
Then touch in order:
– the lighting control,
– the 1 control, and then
– the lighting control.
If power management is turned on, the
1 and B indicators will be continuously
lit.
If it is turned off, the 1 and B indicators
will flash.
Touch the 1 control to turn power
management off.
The 1 and B indicators will flash.
Touch the B control to switch it on.
The 1 and B indicators will be
continuously lit.
Confirm the setting by pressing the
delayed shutdown control.
All the indicator lights will go out.
If the new setting is not confirmed
within 4minutes, the ventilation hood
will revert to the previous setting.
Safety shut-off
If power management has been
deactivated, the ventilation hood will
switch itself off automatically after
12hours if it has been left on (blower
and overhead lighting).
To switch it back on, press the On/
Off control or the lighting
control.