Installation Instructions

Guide to the appliance
15
a
Chimney extension
b
Chimney
c
Canopy
d
Control panel
The symbols act as sensor-controlled buttons. To select a function, tap the
button. An audible tone sounds briefly to confirm selection.
e
Grease filter
f
Spacer frame
The spacer frame creates a shadow gap between the chimney and the ceiling.
The hood can be installed with or without the spacer frame.
g
Recirculation vent
(only for recirculation mode)
h
Overhead lighting
i
OdorFree Charcoal Filter
Optional accessory for recirculation mode
j
Sensor control for turning the blower on and off
k
Sensor control for switching the lighting on and off and for dimming the lighting
l
Sensor controls for setting the blower power
m
Sensor control for delayed shutdown function
n
Sensor control for the grease filter saturation indicator
o
Sensor control for the charcoal filter saturation indicator
The controls for the filter saturation indicator are used for displaying operating
hours used and for altering the counter setting. See “Before using for the first
time” for details on how to set the counter for extraction mode or for
recirculation mode.