30” Downdraft Hood Flush Mounting DA 6881 Levantar Shown: KM 6375 with DA 6891 Flush Mounted Please note: This information is subject to change 8mieleusa.
30” Downdraft Hood Flush Installation SPECIFICATIONS Overall Unit Dimensions Overall Canopy Height 30” (762 mm) W x 2511/16” (652 mm) H (Unextended) x 43/4” (120 mm) D 16” (406 mm) Built-In Minimum Opening Dimensions 2515/16” (659 mm) W x 2513/16” (656 mm) H (Including Countertop) x 41/4” (108 mm) D Fan Fan Speeds Maximum CFM 4 DA 6881 w/DAG 600 g 500 CFM DA 6881 w/DAG 1000 g 1000 CFM Duct Duct Diameter DAG 600 g 6” (150 mm) DAG 1000 g 10” (254 mm) Electrical Electrical Requirements Power Cable 120
0” Downdraft Hood Flush Installation STANDARD ACCESSORIES Single Support Bracket for One Cutout Installation Two Support Brackets for One or Two Cutout(s) Installation OPTIONAL ACCESSORIES DAG 600 DUU 2900 500 CFM Internal Blower Recirculation kit for use with DAG 600 DAG 1000 DKF18-900 1000 CFM External Blower Replacement OdorFree charcoal filter (Used with DUU 2900) R2000 Reducing collar limits air flow to less than 300 CFM with DAG 600 Page 3 of 10
30” Downdraft Hood Flush Installation PRODUCT SPECIFICATIONS Page 4 of 10
30” Downdraft Hood Flush Installation TWO INDIVIDUAL CUTOUTS INSTALLATION SPECIFICATIONS Cutout Dimensions for Two (2) Cutouts - Flush Mount Installation - Allows for Installation with Flush Mounted Downdraft in Combination with Flush or Proud Mounted Combisets and Cooktops Page 5 of 10
30” Downdraft Hood Flush Installation TWO INDIVIDUAL CUTOUTS INSTALLATION SPECIFICATIONS Cutout Dimensions for Two (2) Cutouts - Flush Mount Installation - Allows for Installation with Flush Mounted Downdraft in Combination with Flush or Proud Mounted Combisets and Cooktops INSTALLATION SPECIFICATIONS Two (2) Individual Cutout Support Brackets (Included) Two Angle Support Brackets Two small angle brackets are mounted on the downdraft extractor.
30” Downdraft Hood Flush Installation EXTERNAL BLOWER DAG 1000 (Optional Accessory) Page 7 of 10
30” Downdraft Hood Flush Installation EXTERNAL BLOWER DAG 1000 - CONTINUED (Optional Accessory) Page 8 of 10
30” Downdraft Hood Flush Installation RECIRCULATION KIT DUU 2900 (Optional Accessory) Ventilation Cutout Page 9 of 10
30” Downdraft Hood Flush Installation R2000 (Optional Accessory) If you would like to reduce the environmental impact of your ventilation system by limiting the CFM output the Reducing Collar can be installed. It reduces the air flow to less than 300 CFM in use with DAG 600. Check local building codes for maximum CFM requirements.
