36” Downdraft Hood Proud Mounting DA 6891 8mieleusa.
36” Downdraft Hood - Proud Installation DA 6891 Levantar SPECIFICATIONS DA 6891 w/DAG600 — Item DA6891+internal DA 6891 w/DAG1000 — Item DA6891+external DA 6891 Features: • Very sleek and modern look Overall Unit Width 36” (915 mm) Overall Unit Height (Unextended) 2511/16” (652 mm) Overall Unit Height (Extended) 4111/16” (1,058 mm) Overall Canopy Height 16” (406 mm) Overall Unit Depth 43/4” (120 mm) Built-In Minimum Opening Width 3115/16” (812 mm) Minimum Opening Depth 41/4” (108 mm) • Touch
6” Downdraft Hood - Proud Installation DA 6891 Levantar OPTIONAL ACCESSORIES DAG 600 DAG 1000 R1200 500 CFM Internal Blower 1000 CFM External Blower Reducing collar limits air flow to less than 300 CFM with DAG 600 DUU 2900 Recirculation kit for use with DAG 600 DKF18-1 Replacement OdorFree charcoal filter for DUU 2900 DA 6891 Page 3 of 12
36” Downdraft Hood - Proud Installation DA 6891 Levantar PRODUCT SPECIFICATIONS DA 6891 Page 4 of 12
36” Downdraft Hood - Proud Installation DA 6891 Levantar OPTION 1 ONE CUTOUT INSTALLATION SPECIFICATIONS Cutout Dimensions for One (1) Cutout - Proud Mount Installation DA 6891 Page 5 of 12
36” Downdraft Hood - Proud Installation DA 6891 Levantar OPTION 1 INSTALLATION SPECIFICATIONS One Cutout Options with Support Bracket(s) (Included) Single Support Bracket A support bracket is mounted on the downdraft extractor. It serves as a support for the cooktop when the downdraft extractor and the cooktop are installed in a common cutout j. Two Angle Support Brackets The following situation, the support bracket should be replaced with two small angle brackets.
36” Downdraft Hood - Proud Installation DA 6891 Levantar OPTION 2 TWO CUTOUT INSTALLATION SPECIFICATIONS Cutout Dimensions for Two (2) Cutout - Proud Mount Installation - Allows for Installation with Proud Mounted Downdraft in Combination with Flush or Proud Mounted Combisets and Cooktops DA 6891 Page 7 of 12
36” Downdraft Hood - Proud Installation DA 6891 Levantar OPTION 2 INSTALLATION SPECIFICATIONS Two (2) Cutout Option with Support Brackets (Included) Two Angle Support Brackets Two small angle brackets are mounted on the downdraft extractor. They serve as a support for the downdraft extractor when the downdraft extractor and cooktop are installed in two separate cutouts.
36” Downdraft Hood - Proud Installation DA 6891 Levantar EXTERNAL BLOWER DAG 1000 (Optional Accessory) DA 6891 Page 9 of 12
36” Downdraft Hood - Proud Installation DA 6891 Levantar EXTERNAL BLOWER DAG 1000 - CONTINUED (Optional Accessory) DA 6891 Page 10 of 12
36” Downdraft Hood - Proud Installation DA 6891 Levantar Recirculation Kit DUU 2900 (Optional Accessory) Ventilation Cutout DA 6891 Page 11 of 12
36” Downdraft Hood - Proud Installation DA 6891 Levantar Reducing Collar (Optional Accessory) If you would like to reduce the environmental impact of your ventilation system by limiting the CFM output the Reducing Collar can be installed. It reduces the air flow to less than 300 CFM in use with DAG 600. Check local building codes for maximum CFM requirements.
