Operating instructions/Installation instructions

Installation
*INSTALLATION*
22
Before installation
 Before installation, it is important
to read the information given on the
following pages as well as the
“Warning and Safety instructions” at
the beginning of this booklet.
Protective foil
The housing components have protect-
ive foil around them to protect them
from transport damage.
 Please remove this foil before fitting
the housing components. It can be
peeled off easily.
Installation materials
1vent connection
for exhaust ducting 150mm.
1 non-return flap
for fitting into the exhaust socket on
the motor unit (not needed for recircu-
lation mode). Depending on the model,
the non-return flap may already be fit-
ted.
1 mounting rail
for mounting the DAR12xx on a wall.
2mounting brackets
for mounting the DAR12xx on a wall.
2cover caps