Operating and Installation Instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Caring for the environment
- Guide to the ventilation hood
- Description of functions
- Before using for the first time
- Operation
- Energy-saving tips
- Changing settings
- Cleaning and care
- Customer Service
- Installation
- Technical data
Installation
*INSTALLATION*
35
6screws, 4x15mm
4 M4x16mm screws
Montage
Installation
Montaje
Montaggio
Montering
Montagem
Asennus
Installation plan
See the installation plan for details of
the individual steps involved in the
installation of this appliance.
Leave these instructions with the
appliance for the consumer/user.
Installation materials for recirculation
mode
You need the following optional
accessories for recirculation mode.
DUU15x installation kit
contains a directional unit socket,
hose, and hose clips (DUU150 for the
top of the cabinet or DUU151 for the
sides or front of the cabinet).
Further installation materials
(optional accessories)
DASL38 trims
You will need the trims if you wish to
replace an appliance from the DA35xx
or DA36xx series with this ventilation
hood and you want to keep using the
existing cabinet. The trims allow you to
adjust the height of the cabinet sides.
DASB90 filler panel
You can use the filler panel on the rear
of the ventilation hood to level out the
height in relation to a backsplash, for
example. The filler panel can also be
mounted with the spacer strip.