Operating and Installation Guide

Before using for the first time
19
 Touch the On/Off switch.
All symbols light up with reduced
brightness.
 Press and hold the delayed shutdown
control until the grease filter
and charcoal filtersymbols light
up.
 Touch the 2 control.
2 will light up constantly, 3 will flash on
and off.
The ventilation hood will be ready for
connection in the next 2minutes.
 Follow the instructions in the app.
When successfully connected, 2 and 3
will light up constantly.
 Exit connection mode on the
ventilation hood by touching the
delayed shutdown control.
The ventilation hood can now be
operated via the app.
Connecting via WPS
Your WiFi router must support WPS
(WiFi Protected Setup).
 Touch the On/Off switch.
All symbols light up with reduced
brightness.
 Press and hold the delayed shutdown
control until the grease filter
and charcoal filtersymbols light
up.
 Touch the 2 control.
2 will light up constantly, 3 will flash on
and off.
The WiFi connection must be started on
the ventilation hood at the same time as
on the WPS router.
 Press the B control on the ventilation
hood after a few seconds.
After a short while, 2 will light up
constantly, and 3 and B will flash on
and off.
The ventilation hood is ready for
connection in the next two minutes.