Operation Manual

Insufficient water / water
container not in place
After a function has been started:
If the water container is not located cor
-
rectly in place or there is not enough
water in the water container, or if it is
empty, the display will show a small j
next to the symbol for insufficient water
p and a continual audible tone will
sound.
Procedure:
^ Open the door.
^ Check the water level and add more
water if required.
^ Push the water container fully into po-
sition and close the door.
^
Press Start.
The function will now continue as nor
-
mal.
After switching off (with the function
selector at "0") if there is still residual
water in the steam generating unit and
the water container is not in place in the
appliance, a continual tone will sound
and F1 will appear in the display.
Procedure:
^
Place the water container in the ap
-
pliance and close the door.
^
Press Start.
Now the remaining residual water can
be pumped back out of the steam ge
-
nerating unit into the water container.
Use
30