Operation Manual

... the symbol for insufficient water p
j appears in the display and an au
-
dible tone sounds:
Check whether
–
the water container has been pushed
as far as it will go into the appliance.
–
there is sufficient water in the water
container.
–
any parts of the connecting valve
have deteriorated or broken and
need replacing.
See the "Connecting valve" section
for details.
... k j 0 appears in the display.
The appliance has locked itself and re-
quires descaling (see the "Descaling"
section).
...the oven cavity temperature and
the temperature symbol are flashing
in the display:
There was a power cut during a pro
-
gramme. Press the Start button again.
... after switching the appliance off
(function selector switch at the "0"
position) a continual audible tone is
heard and F1 appears in the display.
Check whether the water container is
positioned in the appliance ready to
take residual water being pumped back
out of the appliance.
Problem solving guide
57