Operation Manual

To activate the lock when the
appliance is switched on:
^
After the programme has started, turn
the time/temperature selector until
the lock symbol $ is highlighted in
the display and press the selector to
confirm your selection.
The $ symbol will flash and a "0" will
appear for a short time.
^
Whilst the $ is flashing, turn the
time/temperature selector to "1".
The activation of the lock is
automatically stored in memory and
after a few seconds the display will
change to show the current
temperature of the cooking
compartment or the cooking duration.
The cooking duration and temperature
cannot be altered. The oven can be
switched off and back on again but not
operated.
To deactivate the lock when the
appliance is switched on:
^
Turn the time/temperature selector
until the lock symbol $ is highlighted
in the display and press the selector
to confirm your selection.
The $ symbol will flash and a "1" will
appear in display for a short time.
^
Whilst the $ is flashing, turn the
time/temperature selector to "0".
The lock is now deactivated.
Operation
32