Operation Manual
Table Of Contents
- Contents
- Warning and Safety instructions 5
- Caring for the environment 10
- Guide to the appliance 11
- Description of the functions 15
- Before using for the first time 19
- Operation 23
- Additional functions 29
- Settings 33
- Cleaning and care 36
- Problem solving guide 44
- Optional accessories 47
- Safety instructions for installation 51
- Appliance and building-in dimensions 52
- Installing the appliance 55
- Electrical connection 56
- After sales service, data plate 58
,
Installation work and repairs to electrical appliances
must only be carried out by a suitably qualified and
competent person in strict accordance with current local
and national safety regulations (BS 7671 in the UK).
Repairs and other work by unqualified persons could be
dangerous. The manufacturer cannot be held liable for
unauthorised work.
What to do if ...
... you cannot switch the appliance on.
Check whether the mains fuse has tripped.
If this is not the case, then disconnect the appliance from the
electricity supply for approx. 1 minute. To do this:
– switch off at the socket and withdraw the plug, or
– switch off at the isolator, or
– disconnect the mains fuse.
Reset the trip switch in the mains fuse box, and switch the
appliance back on. If it still will not switch on, contact a
qualified electrician or the Miele Service Department.
... the appliance is in demo mode.
The appliance will not heat up if it is in demo mode. See
"Settings / Showroom programme".
... the fan can still be heard after the appliance has been
switched off.
The appliance is fitted with a fan which removes steam from
the oven.
The fan will continue to run for a while after the appliance has
been switched off.
Problem solving guide
44