Operation Manual
Table Of Contents
- Contents
- Warning and Safety instructions 5
- Caring for the environment 10
- Guide to the appliance 11
- Description of the functions 15
- Before using for the first time 19
- Operation 23
- Additional functions 29
- Settings 33
- Cleaning and care 36
- Problem solving guide 44
- Optional accessories 47
- Safety instructions for installation 51
- Appliance and building-in dimensions 52
- Installing the appliance 55
- Electrical connection 56
- After sales service, data plate 58
Setting the correct boiling point for water
The boiling point for water at a high altitude above sea level
will be lower than the boiling point for water at sea level. To
adjust the boiling point for the altitude in your area, fill the
water container with mains tap water (see "Operation /
Preparing the appliance for use") and then run the Cook
universal 100 °C programme for 15 minutes. Proceed as
described in "Operation".
This procedure sets the correct boiling point for water for the
altitude in your area and also flushes out the waterways.
Warning! A lot of steam will be emitted from the appliance.
If you move house, the appliance will need to be re-set for
the new altitude if this differs from the old one by more than
300 m. To do this, descale the appliance (see "Cleaning and
care / Descaling").
Before using for the first time
22