Operation Manual
Table Of Contents
- Contents
- Warning and Safety instructions 5
- Caring for the environment 10
- Guide to the appliance 11
- Description of the functions 15
- Before using for the first time 19
- Operation 23
- Additional functions 29
- Settings 33
- Cleaning and care 36
- Problem solving guide 44
- Optional accessories 47
- Safety instructions for installation 51
- Appliance and building-in dimensions 52
- Installing the appliance 55
- Electrical connection 56
- After sales service, data plate 58
Pre-heat
Your appliance has a pre-heating function. This heats the
oven interior to approx. 40 °C. The heating-up time is then
shorter as the oven interior is pre-heated and therefore the
cooking process takes less time.
The appliance is delivered with the pre-heating function
deactivated. If you wish to use it you will need to alter the
setting (see "Settings / Pre-heat").
When the pre-heat function has been activated you can still
choose whether you want to use it for each programme.
The water container must be filled with water for
pre-heating.
The pre-heating process is cancelled by
- Opening the door.
- Touching the ;, ? sensors or "OK".
- Selecting a different function.
You can start the process again by switching the appliance
off and back on again and then selecting a function.
Using pre-heat
^
Select the function you want.
Do not enter a duration.
The pre-heating process will begin after a few seconds.
When the correct temperature has been reached,
"Programme finished" will appear in the display.
^
Place the food in the oven.
^
Set the temperature and duration as normal.
Not using pre-heat
^
Place the food in the oven.
^
Select the function you want.
^
Set the required duration.
^
Confirm this or set the required temperature.
Additional functions
31