Operation Manual
Table Of Contents
- Contents
- Warning and Safety instructions 5
- Caring for the environment 10
- Guide to the appliance 11
- Description of the functions 15
- Before using for the first time 19
- Operation 23
- Additional functions 29
- Settings 33
- Cleaning and care 36
- Problem solving guide 44
- Optional accessories 47
- Safety instructions for installation 51
- Appliance and building-in dimensions 52
- Installing the appliance 55
- Electrical connection 56
- After sales service, data plate 58
Pre-heat
This function can be activated or deactivated.
Recommended temperatures
If you frequently change a recommended temperature it may
be a good idea to change it permanently. You can change
the temperatures within the permitted range.
Water hardness
The steam oven is set at the factory to water hardness setting
IV (Very hard 4). You can set the steam oven for the water
hardness level in your area.
You can use the test strip supplied to check the water
hardness level, or your local water supplier will be able to
advise you on the water hardness of your area.
The water hardness is shown as settings I to IV equivalent to
the German scale 1 to >21 °dH (0.2 >3.8 mmol/l).
Hardness level Hardness range Setting
I 1-7 °dH
(0.2-1.3 mmol/l)
Soft 1
II 8-14 °dH
(1.4-2.5 mmol/l)
Medium 2
III 15-21 °dH
(2.7-3.8 mmol/l)
Hard 3
IV >21 °dH (above
3.8 mmol/l)
Very hard 4
Display
The contrast and brightness can be adjusted.
Volume
The volume of the buzzer and keypad tone can be altered.
Settings
34