Operating instructions/Installation instructions
Table Of Contents
- Contents
- Warning and Safety instructions
- Caring for the environment
- Guide to the appliance
- Controls
- Description of functions
- Before using for the first time
- Operation
- General notes
- Steam cooking
- Special applications
- Settings
- Note for test institutes
- Cleaning and care
- Problem solving guide
- Optional accessories
- Technical data
- After sales service
Problem solving guide
76
Many malfunctions and faults that can occur in daily operation can be easily
remedied. Time and money will be saved because a service call will not be
needed.
The following guide may help you to find the reason for a malfunction or a fault,
and to correct it.
Problem Cause and remedy
You cannot switch the
appliance on.
The fuse has tripped.
Reset the trip switch in the fuse box or replace the
fuse in the plug (see data plate for minimum fuse
rating).
There may be a technical fault.
Disconnect the appliance from the mains connec-
tion for approximately 1minute by:
– Tripping the relevant mains fuse or unscrewing
the fuse completely, or
– Switching off the residual current protection
device
If, after resetting the trip switch in the mains fuse
box or the residual current protection device, the
steam oven will still not turn on, contact a qualified
electrician or Miele Service.
The oven does not heat
up.
Demo mode has been activated. appears in the
display.
The steam oven can be operated but does not heat
up.
Deactivate demo mode (see “Settings”).
The oven cavity has been warmed up by a warming
drawer in operation underneath it.
Open the door and let the oven cool down.
The symbol and a
number between and
appear in the display.
and are flash-
ing.
The appliance needs to be descaled.
Proceed as described in “Cleaning and care” –
“Descaling”.