Operating instructions/Installation instructions

Operation
44
Cleaning the steam oven
 If necessary, remove the condensate
tray from the oven compartment and
empty it.
 Risk of injury caused by hot wa-
ter.
At the end of a cooking programme,
hot water left in the steam generator
is pumped back into the water con-
tainer.
Take care not to tip the water con-
tainer when taking it out of the appli-
ance.
 Remove the water container.
 Remove the spill guard and empty
the water container.
 After each use, clean and dry the
whole appliance as described in
“Cleaning and care”.
Make sure the spill guard engages
correctly when installing it.
 Leave the appliance door open until
the oven compartment is completely
dry.
Refilling the water
If water needs replenishing during the
programme, a tone will sound and the
display will prompt you to refill the con-
tainer with fresh water.
 Take out the water container and re-
plenish the water.
 Push the water container into the ap-
pliance.
The cooking programme is resumed.
Changing values and settings
for a cooking programme
Depending on the function, as soon as
a cooking programme is in progress,
you can change the values or settings
for this programme.
Depending on the function, you can
change the following settings:
- Temperature
- Duration
- Finish at
- Start at
Changing the temperature
You can change the temperature for the
Steam cooking and Eco Steam cooking
functions.
You can permanently reset the recom-
mended temperature to suit your
cooking preferences by selecting Fur-
ther| Settings| Recommended
temps..
 Select the or arrow buttons or
swipe to the right or left in the
area.
The desired temperature appears in the
display.
 Change the desired temperature via
the navigation area.
The temperature changes in 5°C steps.
 Confirm with OK.
The cooking programme will restart with
the new desired temperature.