Operating instructions/Installation instructions

Problem solving guide
96
Problem Cause and remedy
During operation an un-
usually large amount of
steam escapes, or
steam escapes from
parts of the oven where
it does not usually.
The door is not properly closed.
 Close the door.
The door seal is not correctly fitted.
 Press it in all the way round the door to make sure
it is fitted evenly.
The door seal is damaged, e.g. cracks can be seen.
 Replace the door seal.
This can be ordered from Miele (see the end of this
booklet for contact details).
A whistling sound is
heard when the appli-
ance is switched on
again.
When the door is closed, the pressure has to equal-
ise, which can cause a whistling sound. This is not
a fault.
The Start at and Finish at
functions are not avail-
able.
The temperature in the oven compartment is too
high, e.g. after a programme has finished.
 Open the door and let the oven compartment
cool down.
These functions are not available with Descale.
F44 Communication fault
 Switch the steam oven off and then back on again
after a few minutes.
 If the same message appears again, call the Ser-
vice Department.
F and other fault codes Technical fault.
 Switch the appliance off and contact Miele.