Steam Oven Operating and Installation Instructions

Changing the settings during
operation
It is not possible to change the function
during the heating up or the cooking
phase. Switch the appliance off and
start again.
To change the temperature during
the heating up phase:
^
Press the time/temperature selector.
The set temperature will appear in the
time/temperature display and the
temperature symbol z will flash for a
short time.
^ Whilst the symbol is flashing, turn the
time/temperature selector to the
required temperature.
The altered temperature is
automatically stored in memory and
after a few seconds the display will
change to show the current
temperature of the cooking
compartment.
To change the temperature during
the cooking phase:
Turn the time/temperature selector until
the temperature symbol z is highlighted
in the display and the set temperature
appears.
^
Press the time/temperature selector.
The z symbol will flash for a short time.
^
Whilst the symbol is flashing, turn the
time/temperature selector to the
required temperature.
The altered temperature is
automatically stored in memory and
after a few seconds the display will
change to show the cooking duration
remaining.
Operation
27