Operating Instructions and Installation Instructions

Cleaning and care
150
 Switch the st
eam oven on and select
Maintenance | Descale.
The message Please wait... will appear in
the
display. The descaling process is
being primed and may take a few
minutes. As soon as the appliance is
ready you will be prompted to fill the
water container.
 Fi
ll the water container with cold
fresh tap water up to the level
marker  and drop 2 Miele descaling
tablets in it.
 P
ush the water container into the
appliance until it connects.
 Confirm with OK.
 Empty t
he condensate container.
 Confirm with OK.
The descaling process will now begin
and the duration remaining will count
down in the display.
It is only possible to cancel the
descalin
g process during the first 6
minutes. Do not switch the appliance
off during the descaling process. If it
is switched off before the end of the
process, the whole process will have
to be started from the beginning
again.
The water container will need emptying
and rinsin
g twice and refilling with fresh
tap water during descaling. The
condensate container must be emptied.
 F
ollow the instructions in the display.
 Confirm each with OK.
Once this has taken place Empty the
condensate container will appear in the
display
.
 F
ollow the instructions in the display.
 Confirm with OK.
The descaling process is complete.
After descaling
 Remo
ve, empty and dry the water
container and condensate container.
 Switch the st
eam oven off.
 Dr
y the oven interior.
 L
eave the appliance door open until
the oven interior is completely dry.