Operating Instructions and Installation Instructions

Problem solving guide
155
Problem Cause and remedy
The Start at and Ready at
functions have not
work
ed.
The temperature in the oven is too high, e.g. after a
pr
ogramme has finished.
 Open the door and let the oven cool down.
These functions are not available with Menu cooking
and Maintenance.
Cakes and biscuits are
not
cooked properly
after following the
durations given in the
recipe.
The temperature set is not the same as the one given
in the r
ecipe.
 Chang
e the temperature.
The grease filter is inserted in the back panel. Baking
tak
es longer with this filter is place.
 Incr
ease the baking duration.
The recipe has been altered. For example, adding
mor
e liquid or eggs can increase the duration
required.
 Adap
t the temperature or baking duration
accordingly.
Cakes or biscuits are
unevenly
browned.
The set temperature is too high.
The grease filter has not been taken out of the back
panel.
More than two levels were used for baking.
 Bak
e on a maximum of two levels.
F10 The suction tube in the water container
– is not fitted correctly.
– is not positioned vertically.
 Connect it properly and make sure it is vertical:
F11
F20
The drain hoses are blocked.
 P
roceed as described in "Cleaning and care -
Descaling".
 If the fault message appears again, switch the
appliance off and contact Miele.