Operating and Installation instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Overview
- Control panel
- Description of functions
- Initial commissioning
- Modes / Programs / Menus
- Operation: Steam cooking
- Operation: Combination cooking mode
- Operation: Functions without steam
- Quick guide
- Interrupting operation
- Additional functions
- Setting additional durations
- Turning off automatically
- Turning on and off automatically
- Sequence of an automatic cooking process
- Rapid PreHeat
- Switching off Rapid PreHeat
- Changing the operating mode
- Changing settings during a cooking process
- Changing the temperature
- Changing the core temperature
- Changing the broil level
- Changing the cooking duration
- Deleting a cooking duration
- Deleting a finish time
- Canceling cooking
- MyMiele
- MasterChef
- Favorites
- Alarm + Timer
- General notes
- Steam cooking
- Sous-vide (vacuum) cooking
- Special modes
- Roast probe
- Roast
- Bake
- Broil
- Settings
- Cleaning and care
- Frequently Asked Questions
- Optional accessories
- IMPORTANT SAFETY INSTRUCTIONS - INSTALLATION
- Detailed dimensions of oven front
- Connecting the water intake and drain hoses
- Installation dimensions
- Installation and connection
- Water connection
- Electrical connection
- Caring for the environment
- Technical Service
- MieleCare
- Copyright and licenses
Installation and connection
180
Preparing the steam oven
Before installing and connecting the
appliance to services, please read
"Water connection."
Securing the water intake hose
The water intake hose is connected to
the back of the appliance, top left hand
side.
Connect the end of the stainless steel
hose to the intake connection.
Make sure it is screwed on correctly
and securely.
Secuing the drain hose
The drain hose is connected to the back
of the appliance, bottom left hand side.
Connect the end of the plastic hose
to the appliance and secure it with
the hose clip.
Install and connect the appli-
ance
A fault can occur if the appliance is
not correctly aligned.
For correct functioning of the steam
generator please make sure that the
appliance is horizontally level.The
maximum deviation should not ex-
ceed 2°.
Connect the power cord to the appli-
ance.
Feed the water intake hose and the
drain hose through the cut-out in the
base of the housing unit.
Push the appliance into the niche and
align it. Make sure that the power
cord and water intake and drain
hoses do not get trapped or dam-
aged when doing so.
Secure the appliance left and right
using the screws supplied 1/8" x
1" (3.5mm x 25mm) to the sides of
the unit, as illustrated.
Connect the appliance to the water
supply and the drainage point (see
"Connection to the water supply and
drainage system").
Connect the appliance to the electri-
cal supply.
Check the appliance for correct func-
tion in accordance with the Operating
Instructions.