Operating and Installation instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Overview
- Control panel
- Using the appliance
- Description of functions
- Before first use
- Settings
- Settings overview
- Opening the Settings menu
- Language
- Time
- Date
- Lighting
- Start screen
- Display
- Volume
- Units of Measurement
- Keeping warm
- Steam reduction
- Recommended temperatures
- Booster
- Automatic rinsing
- Water hardness
- Proximity sensor
- Safety
- Furniture front recognition
- Miele@home
- Remote Control
- SuperVision
- RemoteUpdate
- Software version
- Legal information
- Showroom Program
- Factory default
- Alarm + Timer
- Main and submenus
- Energy-saving tips
- Operation
- General notes
- Steam cooking
- Sous-vide (vacuum) cooking
- Special modes
- Reheat
- Defrost
- Miele Mix & Match
- Blanching
- Canning
- Canning cakes
- Dehydrate
- Proofing
- Menu Cooking – automatic
- Sanitizing Cookware
- Warm-up Cookware
- Keep warm
- Heating damp towels
- Dissolving Gelatine
- Decrystalize honey
- Melting Chocolate
- Making Yogurt
- Rendering Fat
- Sweating Onions
- Juicing
- Fruit jam
- Skinning Fruits and Vegetables
- Preserving Apples
- Preparing custard royale
- Automatic Programs
- MyMiele
- Favorites
- Baking
- Roasting
- Broiling
- Cleaning and care for the steam oven
- Frequently Asked Questions
- Optional accessories
- Customer Service
- Caring for the environment
- Installation
- Declaration of conformity
- Copyrights and licenses
Overview
26
Installing and removing the FlexiClip
telescopic runners
Danger of injury caused by hot
surfaces.
The steam oven gets hot during op-
eration. You could burn yourself on
the heater elements, oven compart-
ment, side racks, or accessories.
Allow the heater elements, oven
compartment, the side racks, and
the accessories to cool down before
fitting or removing the FlexiClip tele-
scopic runners.
The FlexiClip telescopic runners are in-
stalled in between the two rails that
make up a shelf level.
The FlexiClip telescopic runner with the
Miele logo is installed on the right.
When installing or removing the Flexi-
Clip telescopic runners, do not extend
them.
Hook the FlexiClip telescopic runner
onto the lower rail of a shelf level at
the front (1.) and push it along the rail
into the oven compartment (2.).
Then secure the FlexiClip telescopic
runner to the lower rail of the shelf
level (3.).
If the FlexiClip telescopic runners are
difficult to pull out after installing, you
may need to pull firmly on them once
to release them.
To remove a FlexiClip telescopic runner,
proceed as follows:
Push the FlexiClip telescopic runner
in all the way.
Remove the FlexiClip telescopic run-
ner by raising it at the front (1.) and
then pulling it forward along the rail of
the shelf level and out (2.).