Operating and Installation Instructions Coffee System To prevent accidents and appliance damage read these instructions before installation or use. en - US, CA M.-Nr.
Contents IMPORTANT SAFETY INSTRUCTIONS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Preparing your appliance for an extended vacation . . . . . . . . . . . . . . . . . . . . . . . . 9 Guide to the coffee system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Controls and display elements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Contents Creating a user profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 Accessing profiles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 Creating a user profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 Selecting a user profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Contents Cleaning and care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44 Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44 Rinsing the system. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46 Milk pipework . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
IMPORTANT SAFETY INSTRUCTIONS When using electrical appliances basic safety precautions should always be followed, including the following: Read all instructions before installation or use of the coffee system. ~ Persons which lack physical, Please read these instructions carefully to prevent accidents and machine damage. This appliance complies with current safety requirements. Improper use of the appliance can cause personal injury and material damage.
IMPORTANT SAFETY INSTRUCTIONS Technical safety ~ For safety reasons, this coffee ~ Installation work and repairs must machine may only be used once it has been safely installed. only be performed by a trained technician in accordance with national and local safety regulations. Repairs and other work by unauthorized persons could be dangerous and may void the warranty. ~ A damaged coffee system can be dangerous. Before installing the coffee machine, check for externally visible damage.
IMPORTANT SAFETY INSTRUCTIONS ~ The integrated waterproof system will effectively protect the machine from water damage if the following conditions are met: – The coffee machine is installed correctly (electricity and water supply). – The coffee machine is immediately repaired if any damage is detected. – The water supply is shut off during extended periods of non-use (e.g. vacation).
IMPORTANT SAFETY INSTRUCTIONS ~ Please note the following regarding water: – Without a plumbed water supply: Only fill the water tank with cold, fresh tap water. Hot water or other liquids can damage the coffee system. – Change the water every day to prevent a build-up of bacteria. When using a plumbed water supply: Empty the water tank once a day. – Do not use mineral water. Mineral water will cause a lot of limescale to build up in your coffee system and damage it.
IMPORTANT SAFETY INSTRUCTIONS For machines with stainless steel trim: ~ Do not use sticky notes, transparent adhesive tape, masking tape or other types of adhesive on the surface of the trim. These damage the surface, causing it to lose its dirt repellent protective coating. ~ The surface of the stainless steel trim is susceptible to scratching. Even magnets can cause scratches to appear.
Guide to the coffee system Front view a On/Off touch control K b Control and display elements c Door grip d Hot water dispenser e Drip tray f Main dispenser, height-adjustable, with lighting g Milk container with lid 10
Guide to the coffee system Interior view h Ground coffee chute cover i Brew unit j Ground coffee chute k Grind control lever l Coffee bean container m Water tank with inlet n Drip tray with no-spill grid o Waste unit p Drip catcher cup q Main dispenser connector cap r Service cover 11
Controls and display elements a On/Off touch control K Turn machine on and off b Beverage controls Preparation of .
Accessories Included accessories Optional accessories – Coffee scoop for measuring ground coffee Miele offers a range of useful accessories, as well as cleaning and conditioning products for your coffee machine.
First steps to use Before the first use Setting the language ^ The appliance must be correctly installed and connected before the first use. See the "Installation instructions". ^ Tap the arrow buttons until the desired language is highlighted. Tap the OK button. ^ Remove any protective coverings. Clean the coffee machine thoroughly (see "Cleaning and care") before filling it with water and coffee beans.
First steps to use Display Water hardness You can choose between the following options: Water hardness is an indication of the amount of minerals dissolved in water. The higher the mineral content, the harder the water. And the harder the water, the more often the coffee machine will need to be descaled. – On: The date and time are always displayed even when the machine is turned off. – Off: The display will go dark as soon as the machine is turned off.
First steps to use Determine water hardness You can also determine the water hardness with the supplied test strips. ^ Dip the test strip in water for about one second. Then shake off any excess water. The result will be visible after about one minute. You can now set the water hardness level for the coffee machine. Setting the water hardness ^ Tap "Settings". ^ Tap the arrow buttons until "Water hardness" is highlighted. Tap the OK button.
Operation You can operate the coffee machine by tapping the touch buttons with your finger. If you want to select an option, tap the arrow keys X and Y until the desired option is highlighted. You are in the beverages menu when the display shows: To confirm the selection, tap the OK button. { Miele Exit menu or cancel action To exit the current menu, tap #. Select drink If a button has not been pressed for a while, the coffee machine will revert to the drink menu.
Filling the water tank If the coffee machine is connected to a plumbed water supply, the water is filled up automatically as soon as the machine is turned on. The inlet guide at the water tank lid ensures that the water is flows in quietly. Of course, you can also fill the water tank manually when using the coffee machine without a plumbed water supply (water tank operation). ^ Open the unit door. ,Change the water daily to prevent bacteria growth.
Filling the coffee bean container You can make coffee or espresso from roasted whole coffee beans that the coffee machine will grind fresh for each portion. Add fresh beans to the coffee bean container. Alternatively, you can make coffee or espresso from ground coffee (see "Coffee beverages prepared from ground coffee"). Only fill espresso or coffee beans in the beans container. Anything else including ground coffee - will damage the grinding unit.
Turning the coffee machine on and off Turning on When the machine is turned on, it heats up and rinses out the pipework. This cleans and heats the pipework to ready the machine for coffee preparation. If the coffee machine still has an operating temperature higher than 140°F (60°C), rinsing will not take place. Turning off for longer periods of time If you will not be using the coffee machine for a while: ^ Empty out the drip tray, the waste unit and the water tank. ^ Tap the On/Off button K.
Adjusting the coffee dispensers to the cup height The coffee dispensers can be raised or lowered to the height of your cup or glass. If the dispensers are closer the beverage will not cool down as quickly and the crema will have a better consistency. ^ Pull the coffee dispenser down to the same level as the rim of the cup. or ^ Push the dispenser up until there is enough room to fit a larger cup or glass underneath.
Preparing beverages Preparing espresso, coffee or lungo (large) coffee Preparing double portions You can request two portions of espresso or coffee at once in one cup or in two separate cups simultaneously. To fill two cups at the same time, ^ Place a cup under the main spout. ^ Tap the touch key for the desired beverage: . Espresso / Coffee x in "More programs": Lungo coffee The chosen coffee beverage will now be dispensed.
Preparing beverages Cancel preparation You can cancel preparation while "Stop" is displayed. ^ Tap the OK button. The coffee machine will cancel preparation. If two portions are selected for preparation, a single tap on the OK button will only cancel preparation of the first portion. To cancel both portions, keep your finger on the OK button a bit longer.
Preparing beverages Filling ground coffee Use the scoop supplied with the machine to ensure the correct amount of ground coffee is used. Do not add more than one level scoop of ground coffee to the coffee chute. If too much ground coffee is filled into the chute the brew unit cannot process it. The coffee machine will use all the ground coffee that you have filled into the chute for the next coffee preparation. ^ Open the appliance door.
Preparing beverages Beverages with milk You can prepare various specialty coffee beverages with milk or Hot milk and Milk froth. The following specialty coffee options are available: Cappuccino consists of about two-thirds milk froth and one-third espresso. Latte macchiato consists of one-third each of hot milk, milk froth and espresso. a Lid Café latte consists of hot milk and coffee.
Preparing beverages Preparing beverages with milk ^ Place a suitable cup or glass under the main dispensers. ^ Tap the touch key for the desired beverage: Preparing beverages from a profile If you have already created a profile, you can select it before preparing a beverage. See "Creating a user profile". ^ Tap "Profile". H Cappuccino ^ Tap "Select profile". k Latte macchiato x in "More programs": Café latte, Hot milk, Milk froth ^ Tap the arrow buttons until the desired profile is highlighted.
Customizing your coffee To ensure that your coffee system is ideally adjusted to the type of coffee you use, you can use the "Parameters" , menu to change the ground amount, adjust the brewing temperature or select the "Pre-brewing" option. You can customize these settings for each beverage. You can also adjust the grinder setting to suit the type of coffee you are using. To prevent damage to the grinder: Adjust the coffee grinder one level at a time. Let the beans grind before adjusting another notch.
Customizing your coffee Displaying and adjusting the parameters for a beverage ^ Tap ,. The , symbol is illuminated. ^ Tap the arrow buttons until the desired beverage is highlighted. Tap the OK button. The current settings for the ground amount, brewing temperature and pre-brewing for this beverage are displayed. ^ Tap the arrow buttons until "Amount of coffee" is highlighted. Tap the OK button. ^ Tap the arrow keys to change the ground amount. Tap the OK button. The setting is now saved.
Customizing your coffee Pre-brewing ground coffee When the pre-brewing function is Turned on, the freshly ground coffee is first moistened with a little hot water. Then the remaining water is forced through the moistened coffee at high pressure. This helps release the flavor of the coffee. You can program normal or long pre-brew or turn the Pre-brewing" function off. The default factory setting for the "Pre-brew" function is Off. ^ Tap the arrow keys until "Pre-brewing" is highlighted. Tap the OK button.
Setting the serving size The flavor of a coffee beverage depends not only on the type of coffee, but also on the quantity of water used. You can adjust the amount of water used for each portion of espresso, coffee or hot water to suit your cup size and the type of coffee used. For beverages prepared with milk, you can also adjust the milk and milk froth ratio in addition to the espresso or coffee size. You can also program the portion sizes of hot milk and froth.
Setting the serving size Setting serving sizes for cappuccino and latte macchiato Setting serving sizes for Café latte, hot milk and milk froth ^ Place a suitable cup or glass under the main dispensers. ^ Place a suitable cup or glass under the main dispensers. ^ Tap H or k until the display shows"Beverage size". ^ Tap ,. The ingredients of the drink are now displayed and their respective quantities can be changed.
Setting the serving size Selecting the beverage size in the "Parameter" , menu Setting the serving sizes for various profiles ^ Tap , . You can customize the serving sizes of the individual beverages for each profile. ^ Tap the arrow buttons until the desired beverage is highlighted. Tap the OK button. ^ Tap the arrow buttons until "Beverage size" is highlighted. Tap the OK button. From now on the beverage will be prepared according to the portion sizes set. 32 ^ Tap "Profile".
Creating a user profile If the unit is used by several people with different coffee preferences, you can create individual user profiles. You can adjust the serving size for each coffee beverage for each profile (see "Setting the serving sizes"). The name of the current profile is shown at the top left of the display. Accessing profiles ^ Tap "Profile". The "Profile" is illuminated. Creating a user profile ^ Tap the arrow keys until "Create profile" is highlighted. Tap the OK button.
Creating a user profile Selecting a user profile Deleting a user profile This selection is only possible if a profile has already been created in addition to the standard Miele profile. This selection is only possible if a profile has already been created in addition to the standard Miele profile. ^ Tap the arrow keys until "Select a user profile" is highlighted. Tap the OK button. ^ Tap the arrow keys until "Delete profile" is highlighted. Tap the OK button.
Creating a user profile Reverting to a user profile You can customize the unit so that, after each drink prepared, it automatically reverts to the standard Miele profile or retains the most recently selected custom profile. ^ Tap the arrow keys until "Change profile" is highlighted. Tap the OK button. You can now choose between – Manually: The unit retains the selected user profile until another profile is selected.
Settings The "Settings" menu allows you to customize the coffee machine for your personal needs. Accessing the "Settings" menu Change and save settings ^ Tap "Settings". ^ Use the arrow buttons to select the desired setting. Confirm with the OK button. ^ Tap "Settings". ^ Tap the arrow buttons until the desired option is highlighted. Now you can review or change any settings. ^ Tap the OK button. The check mark ( next to the individual entry shows you which setting is currently active.
Settings Overview of possible settings The factory default setting for each menu item is displayed in bold.
Settings Menu item Possible settings Plumbed water connection on / off Showroom program Demo mode (on / off) Factory default settings Do not reset Reset 38
Settings Language Setting the time of day You can select your language and country for all text displayed on your machine. Tap the arrow keys to set the hours and minutes. Tip: If you have accidentally selected the wrong language, follow the flag icon F to return to the "Language" option. Date Time of day Timer You can customize the time display, the time format and the time of day.
Settings Select timer The available options are: – Timer 1: Turn on at, Turn off at, Turn off after – Timer 2: Turn on at, Turn off at Turn on at Please note that the coffee machine will not turn on at the required time if you have activated the system lock. Turn off after The timer function "Turn off after" is only available with the Timer 1 option. If none of the buttons has been pressed or no beverage has been prepared, the coffee machine will turn itself off after 30 minutes to save energy.
Settings To activate and deactivate the timer Lighting If the timer for "Turn on at" is activated, the + symbol and the desired turn-on time will appear on the display 23:59 hours before if the time display has been set to "On" or "Overnight shutdown". The following options are available: If the system lock has been activated, the timer function "Turn on at" cannot be selected. – Adjust the brightness of the lighting while the machine is turned on.
Settings Info (displaying information) Water hardness In the menu option "Info" the number of portions prepared for each individual beverage can be displayed. You will find the information on water hardness in the "Initial operation" chapter. You can also see whether more than 50 portions can be dispensed before the machine needs to be descaled ("Please descale the coffee system. Remaining number of servings:"). Display brightness Use the arrow keys to adjust the display brightness.
Settings Factory default settings The (Factory default) setting can be used to reset the coffee machine settings to their original default status. Please refer to the "Possible settings" chart for the default factory settings. The following settings will not be reset: - Language - Time - Number of beverage portions - Profiles Showroom program (demo mode) Do not activate this setting for domestic use. The coffee machine can be presented in the showroom or at exhibitions in "Demo mode".
Cleaning and care Overview ,The coffee machine must be cleaned regularly to prevent a build-up of bacteria.
Cleaning and care Danger of burns! Let the unit cool down before you clean it, especially the water in the drip tray. Do NOT use a steam cleaner to clean this unit. Doing so will damage the unit. Never use cleaning products that contain sand, cleaning soda, acids, or chlorides! They will corrode the surface. To avoid mold, growth and odors it is important to clean the machine regularly. The main dispenser connector cap is lubricated with silicone grease.
Cleaning and care Rinsing the system When a coffee drink has been prepared, the coffee machine also rinses itself before turning off. This removes any remaining coffee residue. You can also manually rinse the system. ^ Tap x . ^ Tap the arrow key Y until "Maintenance" is highlighted. Tap the OK button. ^ Tap the arrow keys until "Rinse the system" is highlighted. Tap the OK button. The lines will now be rinsed. Milk pipework Make sure that the milk lines are cleaned regularly and thoroughly.
Cleaning and care Cleaning the milk pipework using the milk line cleaner Make sure that the milk lines are cleaned regularly and thoroughly. Milk contains natural bacteria that will grow when the lines are not sufficiently cleaned. Contamination in the unit can be a health risk. The milk pipework must be cleaned about once a week. The coffee machine will remind you at the correct time. Three days before, the display will show the message "Days until milk pipework cleaning: XX".
Cleaning and care Milk container with lid Ensure that the neck and lip of the container are kept clean (both when filling and when moving the container). Otherwise the unit can malfunction. ^ The milk container (glass) can be cleaned in the dishwasher or by hand using warm water and liquid dish soap. After cleaning, dry the milk container. ^ Fill the water tank with lukewarm water up to the mark 8 and stir the solution. The lid of the milk container must be cleaned only by hand.
Cleaning and care Main dispenser Clean the stainless steel cover of the main dispenser by hand only, using warm water and some dishwashing liquid. All other components are dishwasher safe. ^ Release the dispenser by seizing it by the sides of the magnet and pulling it to the front. ^ Pull the main dispenser all the way down a and pull the cover forward to remove b. ^ Turn the top connecting piece a and pull it off to the top. Also pull the bottom connecting piece b off to the top.
Cleaning and care Milk valve maintenance You should put the milk valve in maintenance mode once per week to ensure good quality milk froth. ^ Tap x . ^ Tap the arrow key Y until "Maintenance" is highlighted. Tap the OK button. ^ Clean the surface of the main dispenser with a damp sponge cloth. ^ Tap the arrow keys until "Condition milk valve" is highlighted. Tap the OK button. The milk valve will go into maintenance position.
Cleaning and care Water tank Waste unit Change the water every day to prevent a build-up of bacteria. After a certain time, the coffee machine will display a message indicating that the coffee grounds container needs to be emptied. At this point at the latest, the container must be cleaned. However, it is best to clean the waste receptacle daily. Coffee grounds can become moldy. Typically there will also be some water in the waste unit, left over from the brewing and rinsing processes.
Cleaning and care Drip tray Clean the drip tray daily to prevent odors and mold. The coffee machine will show a message on the display when the drip tray is full and needs to be emptied. At this point at the latest, the drip tray must be emptied. Danger of burns! If the coffee machine has just been rinsed, wait a while before removing the drip tray. Rinse water will run out of the coffee dispensers. ^ Open the appliance door and carefully remove the drip tray from the appliance.
Cleaning and care Drip tray cover Bean container ^ Remove the drip tray cover. ^ Pull the bean container out of the unit and pull the lid toward the back and off. ^ The drip tray cover can be cleaned in the dishwasher or by hand using warm water and liquid dish soap. ^ Dry the drip tray cover thoroughly. ^ Clean the bean container and its lid by hand using warm water and liquid dish soap. Dry both components. ^ Slide the lid back on, then slide the bean container back into the unit.
Cleaning and care Interior and unit door ^ Clean the interior and the unit door with warm water and liquid dish soap once all removable parts have been removed. Tip: Use a vacuum cleaner to remove dry ground coffee residue. Brew unit Clean the brew unit by hand only using hot water. Do not use soap. The moving parts of the brew unit are lubricated. Detergents will damage the brew unit. Clean the brew unit once a week. Removing the brew unit and rinsing it by hand The brew unit can be removed for cleaning.
Cleaning and care ^ Carefully pull the brew unit out of the coffee machine. To replace the brew unit, repeat the previous steps in the reverse order: If you cannot remove the brew unit or can only do so with difficulty, the brew unit is not in the correct position (see "Frequently asked questions"). ^ Push the brew unit back into the coffee machine, making sure it is straight. When the brew unit has been pulled out, do not alter the position of the brew unit handle.
Cleaning and care Degreasing the brew unit Depending on the natural oil content of the coffee used, the brew unit can become blocked quite quickly. Use the cleaning tablets supplied to clean the brew unit. When the display prompts you to "Place a cleaning tablet in the ground coffee chute and close the chute": These cleaning tablets have been specially formulated for use in the coffee machine to optimize degreasing. They are available from Miele.
Cleaning and care Exterior The surfaces can become discolored or otherwise altered if soiling is not cleaned promptly. Remove any soiling immediately. Make sure no water can penetrate the display! All external surfaces are susceptible to scratching. On glass surfaces, scratches can lead to breakage. All surfaces can become discolored if they are cleaned with unsuitable products. Make sure to immediately wipe away any spills during descaling! ^ Turn off the unit using the On/Off button K.
Descaling Limescale builds up in the coffee machine during use. The limescale buildup in the machine will depend on the hardness of your local water supply. Limescale must be removed regularly. The machine will guide you through the descaling process. Various instructions will appear on the display, e.g. you will be prompted to empty the drip tray or fill the water container. Descaling is required and takes approximately 20 minutes.
Descaling ^ Tap the OK button. The descaling program is now complete and beverages can be prepared in the machine again. When descaling the machine, be sure to wipe off any splashes of descaling agent immediately! These could damage the surfaces. ^ Fill the water tank to the mark with lukewarm water. ^ Add two descaling tablets to the water. Please note the mixing ratio for the descaling tablets. It is important that you fill the water container with enough water.
Frequently asked questions ,Repairs to electrical appliances should only be carried out by a suitably qualified person in accordance with local and national safety regulations. Repairs and other work by unqualified persons could be dangerous. The manufacturer cannot be held responsible for unauthorized work. Display messages ^ To address the "fault", follow the instructions on the display. ^ If the fault message still appears on the display, contact Miele Technical Service.
Frequently asked questions Fault Possible cause and solution Fault 73 or "Check the brew unit" The brew unit cannot reset to the correct position or it is clogged and the ground coffee cannot be processed. ^ Check if you can remove the brew unit (see "Cleaning and care – Brew unit"). ^ If you can remove the brew unit, clean it (see "Cleaning and care – Brew unit"). ^ Push the coffee ejector of the brew unit into the correct position (see image). ^ Reinsert the waste unit and the water tank.
Frequently asked questions Fault Possible cause and solution "Too much ground There is too much ground coffee in the ground coffee chute. coffee" If more than one level scoop is put into the ground coffee chute the brew unit cannot process it. The ground coffee will be directed into the waste container, and a fault will appear in the display. ^ Turn off the coffee machine using the On/Off button K . ^ Remove the brew unit and clean it (see "Cleaning and care – Brew unit").
Frequently asked questions Unusual performance of the coffee machine Problem Possible cause and solution The light does not The lighting has been turned off. illuminate when ^ Turn on the lighting (see "Settings – Lighting"). the coffee machine is turned on. The lighting is defective. ^ Contact Miele Technical Service. When the coffee system is turned on using the On/Off button K the display remains dark. The On/Off button K was not tapped long enough.
Frequently asked questions Problem Possible cause and solution The touch keys do not respond. The coffee machine can no longer be operated. An internal fault has occurred. ^ Open the unit door. The coffee machine does not turn on at the programmed and activated "Turn on at" time. The current process is stopped. ^ Disconnect the power supply by pulling the coffee machine's power cord from the electrical outlet. The system lock feature has been activated.
Frequently asked questions Problem Possible cause and solution The milk lines are The milk pipework or the air intake hose is clogged. being rinsed but ^ Follow the instructions in "Cleaning clogged milk no rinse water pipework". comes out of the main dispenser. The display shows the message "Fill and insert water container". No milk or milk The milk pipework or the air intake hose is clogged. froth is coming out ^ Follow the instructions in chapter "Cleaning clogged milk of the main pipework". dispenser.
Frequently asked questions Problem Possible cause and solution The unit suddenly stopped preparing a beverage. If the water tank is emptied during beverage preparation, the display will show the message "Continue preparation? yes / no" after the water tank has been refilled and inserted. If you do not confirm this message with "yes" within 5 minutes, the machine will stop preparing the beverage. The plumbed water intake is faulty.
Frequently asked questions Unsatisfactory result Problem Possible cause and remedy The consistency of The milk temperature is too high. Good milk froth is the milk froth is prepared with cold milk (< 55°F/13°C). unsatisfactory. ^ Check the milk temperature in the milk container. The milk pipework or the air intake hose is clogged. ^ Follow the instructions in chapter "Cleaning clogged milk pipework". The grinding of the The coffee bean container has run empty during the coffee beans grinding process.
Frequently asked questions Problem Possible cause and remedy The crema on the The grind level is too coarse or too fine. coffee or espresso ^ Set the grinder control to a coarser or finer setting (see is not right. "Adjusting the grinder setting"). The brewing temperature is too high for the type of coffee being used. ^ Set a lower brewing temperature (see "Brewing temperature"). The coffee beans are no longer fresh. ^ Add fresh beans to the coffee bean container.
Cleaning clogged milk pipework If the quality of the milk froth is unsatisfactory, the air intake hose may be clogged. Follow the instructions in "Step 2: Clean air intake hose and angled section in the door". Step 1: Cleaning the milk pipework in the milk container lid If no milk comes out of the main dispenser, only steam, please follow the instructions in Step 1 through 4. First check if the milk in the milk container has spoiled. This can clog the milk lines.
Cleaning clogged milk pipework To reassemble the lid: ^ First insert the gasket in the lid. Then insert the milk intake pipe into the gasket. Make sure not to slide the beveled end of the milk intake hose into the gasket. Step 2: Cleaning the air intake hose and angle section in the door Do not use a needle or similar sharp item. These can cause damage to the parts. ^ Pull the main dispenser all the way down. ^ First detach the air intake hose a from the opening c. Then pull off the angled section b.
Cleaning clogged milk pipework Step 4: Milk valve maintenance ^ Tap x . ^ Tap the arrow key Y until "Maintenance" is highlighted. Tap the OK button. ^ Tap the arrow keys until "Condition milk valve" is highlighted. Tap the OK button. ^ Slide the hoses back onto the angle section and reinsert it. Make sure that the bridge on the angled section faces down. ^ Reinsert the air intake hose into the opening c. The milk valve will go into maintenance position.
After sales service In the event of a fault which you cannot easily fix yourself, please contact the Miele Technical Service Department at the contact information on the back of this booklet. When contacting the Technical Service Department, please quote the model and serial number of your appliance given on the data plate inside the appliance.
Installation instructions Information is subject to change. Please refer to our website to obtain the most current product specification, technical & warranty information. The installation steps are described in the enclosed "Installation Diagram". Leave these instructions with the appliance for the consumer/user. Information is subject to change. Please refer to our website to obtain the most current product specification, technical & warranty information.
Caring for the environment Disposal of packing material Disposal of an old appliance The cardboard box and packing materials protect the appliance during shipping. They have been designed to be biodegradable and recyclable. Please recycle. Old appliances may contain materials that can be recycled. Please contact your local recycling authority about the possibility of recycling these materials. Ensure that any plastic wrappings, bags, etc. are disposed of safely and kept out of the reach of children.
Plumbing The machine must be connected to the water supply in accordance with local and national regulations. Disconnect the machine from the electrical supply before connecting it to the water supply. Turn off the water supply before connecting the coffee machine to the plumbing. – All units and systems used to deliver the water to the coffee system must conform with the requirements of the respective country.
Plumbing Installing the stainless steel tubing in the unit Make sure the stainless steel tube is not kinked or damaged. Do not trim stainless steel tube. ^ Remove the water connection cover at the lower rear side of the coffee machine. ^ Take the angled side of the stainless steel tube and check whether the sealing ring is in place. If necessary, insert it. Connection to the water supply Disconnect the machine from the electrical supply before connecting it to the water supply.
Lead free certificate This product is tested and certified by the WQA against ORD0902 for California "lead free" compliance.
Electrical connection Make sure that the power to the machine is OFF before installing or performing maintenance or repairs. WARNING: THIS APPLIANCE MUST BE GROUNDED Important All electrical work should be performed by a qualified electrician in strict accordance with national and local safety regulations. Installation, repairs and other work by unqualified persons could be dangerous.
Installation Installation and combination options The unit is designed to be built into cabinetry.
Installation A combination with other built-in Miele appliances is possible. For combination installations, it is very important to install the unit with a protective base between the appliance and the unit (exception: installation with a built-in plate warmer).
Installation Ventilation When installing the coffee machine, make sure that the back of the unit is sufficiently ventilated so that steam and hot air can freely escape. The ventilation openings in the surrounding cabinets and the space below the ceiling must be at least 78 3/4"² (200 cm²). Otherwise condensation can form, causing damage to the coffee machine or the surrounding cabinets.
Installation Tip: A place to set down the coffee machine at the level of the installation recess is helpful. This makes it easier for you to install the unit's electrical and water connections. ^ Unscrew the four feet on the underside of the unit by about 1/16" (2 mm) using the larger Allen wrench. The feet can be unscrewed by up to 3/8" (10 mm). ^ Connect the unit to the water supply (see "Plumbing"). ^ Connect the unit to the electrical supply.
Installation Adjusting the door hinges If the door cannot be opened or closed easily after installation, you will have to align the door (TX 20): ^ To adjust the door flush with the front of the cabinet, turn the screw a. ^ To adjust the door horizontally and vertically, turn the screw b.
Please have the model and serial number of your appliance available before contacting Technical Service. U.S.A. Canada Miele, Inc. Importer Miele Limited National Headquarters 9 Independence Way Princeton, NJ 08540 Phone: 800-843-7231 609-419-9898 609-419-4298 Fax: www.mieleusa.com Technical Service & Support Nationwide Phone: 800-999-1360 888-586-8056 Fax: TechnicalService@mieleusa.com Headquarters and Miele Centre 161 Four Valley Drive Vaughan, ON L4K 4V8 www.miele.
CVA 6405 en - US, CA M.-Nr.
