Operating and Installation Instructions

Turning the Powerbrush On/Off
(see fig. 21)
The beater bar in the Powerbrush is
driven by a separate motor, which can
be switched on and off.
^
Press the Carpet/Floor button (j / O)
on the handle.
The Powerbrush turns on. The indicator
on the control panel lights yellow.
You can also use the button to switch
off the Powerbrush while vacuuming,
for example when moving from carpet
to hard floors.
The Powerbrush automatically shuts
off anytime the body of the vacuum
cleaner is placed into the full upright
position.
^ For best results, move the
Powerbrush slowly back and forth
over the area you wish to clean.
Included accessories
(see fig. 22)
The following accessories are mounted
on the rear of the vacuum cleaner.
a Upholstery tool
b Crevice nozzle, 12" (300 mm)
c Dust brush with natural bristles
Attach the accessory you wish to use to
the handle on the vacuum hose or the
telescopic wand.
Upholstery tool
For cleaning upholstery, mattresses,
cushions, draperies, etc.
Crevice nozzle, 12" (300 mm)
For cleaning folds, crevices, corners
and tight spaces.
Dust brush with natural bristles
For cleaning moldings, ornate and
carved articles, delicate items, etc.
The brush head can be turned to attain
the optimal cleaning position.
Maintenance and care
,
Turn off and unplug the vacuum
cleaner before performing any
maintenance work.
The Miele filter system consists of the
following three components.
– FilterBag
– Exhaust filter
– Dust compartment filter
Each of these components must be
changed periodically to maintain the
vacuum cleaner’s efficiency.
Only use Miele FilterBags, filters and
accessories with the "Original Miele"
logo. Only then can the suction
power of the vacuum cleaner reach
its optimum potential creating the
best possible cleaning results.
en
13