Operating instructions Built-in Plate Warmer EGW 4060-14 To prevent accidents and machine damage read these instructions before installation or use. UV M.-Nr.
Contents IMPORTANT SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Guide to the machine. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Before using the plate warmer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Controls . . . . . . . . . . . . . . . . . . . . .
IMPORTANT SAFETY INSTRUCTIONS Installation This appliance is intended for residential use only. Only use the appliance for its intended purpose. Improper use of the appliance can lead to personal injury and material damage. The manufacturer cannot be held responsible for damages caused by improper use of the plate warmer. This appliance complies with current safety requirements. Read all instructions before installing or using for the first time.
IMPORTANT SAFETY INSTRUCTIONS Installation, repair and maintenance work should be performed by a Miele authorized service technician. Work by unqualified persons could be dangerous and may void the warranty. Hardwiring the appliance should be performed by a certified electrician in compliance with all local and national codes and requirements. The manufacturer cannot be held responsible for the damages caused by an inadequate electrical connection.
Guide to the machine a On/Off button b Temperature selector c Warming drawer d Non-slip mat e Indicators 6
Before using the plate warmer ^ Clean the plate warmer with a damp cloth and wipe dry. ^ Heat the empty plate warmer for a minimum of 2 hours. Turn the temperature selector to "Maximum" (see "Selecting a temperature"). ^ Vent the room when heating the drawer for the first time. Metal components have a protective coating which may give off a slight odor the first time your new appliance is heated. The smell will dissipate after a short time and does not indicate a faulty connection.
Use Controls The plate warmer is only intended for warming dishes. Do not use the plate warmer to reheat, cook or keep food and drinks warm. Condensation from food or drinks may cause moisture damage to the appliance. Use pot holders when removing dishes. The drawer can hold a maximum of 55 lbs (25 kg). The appliance works with a convection system. A fan distributes the heat evenly throughout the drawer. The air circulation heats the dishes fast and evenly.
Use Operating Selecting a temperature ^ Place the dishes in the drawer. The temperature selector allows you to select a temperature between 86° and 122 °F (30 and 50 °C). ^ Select a temperature. ^ Turn the appliance on (j). The button will light. ^ Close the drawer. The drawer may open again if closed too forcefully. ^ Turn the appliance off (k), before removing the warmed dishes. Do not turn the knob counterclockwise or clockwise past the 9 o’clock position.
Use Warming times Capacity Various factors will affect the warming times: The capacity of the appliance depends on the dish sizes. – type and thickness of dishes, The maximum load is 55 lbs (25 kg). – quantity, The following assembly picture is an example. – how dishes are arranged, – temperature setting. As you use the plate warmer you will learn which settings suit your needs best. However, the following information can be used as a guide.
Cleaning and care Cleaning the plate warmer Let the drawer cool before cleaning. Never use abrasive cleaners, scouring pads, steel wool or caustic (oven) cleaners on the plate warmer. They will damage the surface. Non-slip mat The mat can be removed to clean the bottom of the drawer. ^ Clean the mat by hand with warm water and liquid dish soap. ^ Dry thoroughly. Do not return the mat until it is completely dry.
Frequently asked questions Repairs should only be carried out by an authorized technician in accordance with local and national safety regulations. Unauthorized repairs could cause injury or machine damage. The manufacturer cannot be held responsible for unauthorized work. Why are the dishes not warm enough? Possible fault Fix The appliance is turned off. Turn the appliance on with the On/Off button. The wrong temperature was selected. Check the temperature setting. The vents were blocked by dishes.
After sales service In the event of a fault which you cannot correct yourself please contact the Miele Technical Service Department. U 1-800-999-1360 techserv@mieleusa.com V 1-800-565-6435 service@miele.ca When contacting the Technical Service Department, please quote the model and serial number of your appliance both of which are shown on the enclosed data plate. Adhere the data plate to the box below. Make sure the model given on the data plate matches that of this manual.
Installation Instructions
Help protect our environment Disposal of the packing material The transport and protective packing materials are environmentally safe for disposal and may be recycled. Ensure that any plastic wrap is disposed of safely and kept out of the reach of children. Danger of suffocation! Please recycle. 16 Disposal of an old appliance Old appliances contain materials which can be recycled. Please contact your local recycling center about potential recycling.
Installation Installation Safety Instructions Before installation make sure that the voltage and frequency listed on the data plate correspond with the household electrical supply. This data must correspond in order to avoid risk of damage to the appliance. If in doubt, consult a qualified technician. The electrical outlet should be easily accessible after installing the unit. Only install the plate warmer in combination with built-in appliances recommended by the manufacturer.
Installation Combinations EGW 40x0 -14 Oven H 4120, H 4220 18 Microwave-compact oven
Installation Steam ovens CVA 19
Installation Installing the appliance ^ Set the plate warmer into the niche, push is all the way in and align it at a right angle. The installation kit contains 3 metal strips with adhesive on the back side. Fix the metal strips on the plate warmer so that the gap between the appliance and the cabinet is sealed. This air cushion acts as insulation. ^ Remove the protective foil from the adhesive on the metal strip.
Installation Aligning the appliance front After installing the combination appliance it might be necessary to align the appliance front and/or to even the gap between the plate warmer and the combination machine. Flat washers are supplied beneath the knurled nuts, which fix the drawer to the telescopic runners. ^ Loosen the knurled nuts and take the drawer out. ^ Align and even the gap with the flat washers by changing their position (above or below the drawer), on both sides.
Installation Electrical connection The electrical installation instructions for any appliance installed in combination with the plate warmer must be observed. When another appliance is installed in combination with the plate warmer to the same circuit breaker, operating both appliances at the same time may cause an overload. If in doubt consult a qualified electrician. All electrical work should be done by a qualified technician, in strict accordance with national and local safety regulations.
All rights reserved/1605 M.-Nr.
