Operating instructions/Installation instructions

Table Of Contents
Cleaning and care
38
Cleaning the drawer front and
interior
Malfunction due to dirty and/or
covered sensor controls.
The sensor controls do not react or
unintentional switching procedures
result, perhaps even the automatic
deactivation of the drawer.
Keep the sensor controls and indic-
ators clean.
Do not place anything over the
sensor controls or indicators.
Remove all soiling with a clean
sponge and a solution of hot water
and washing-up liquid or a damp mi-
crofibre cloth.
Wipe with clean water afterwards.
After cleaning, wipe the surfaces dry
using a soft cloth.
Cleaning the anti-slip mat
Damage caused by incorrect
cleaning.
Washing the anti-slip mat in a dish-
washer or washing machine will
damage it.
The anti-slip mat should only be
cleaned by hand.
Damage caused by incorrect
drying.
Drying the anti-slip mat in an oven
will damage it.
Never place it in the oven to dry.
Remove the anti-slip mat from the
drawer.
Clean the anti-slip mat using a solu-
tion of hot water and a little washing-
up liquid.
Only dry the anti-slip mat using a soft
cloth.
Replace the anti-slip mat in the
drawer only when it is completely dry.